Filter
Top Products
5
OPERATION
If a paper jam occurs, slide the
Function switch to the REV
(Reverse) position to withdraw the
non-shredded paper.
1
REMOVING PAPER JAMS:
SPECIFICATIONS
On occasion, paper strips get stuck
in the shredder. In this case, slide
the Function switch to the REV
position for 2 to 3 seconds. Then,
slide the Function switch back to
the ON/AUTO or the FWD position.
Repeat this procedure one to two
times to fully clear the paper tips.
1
PAPER TIP SOLUTION
Power Source......................................................120V AC, 60Hz
Shred capacity...............................5 single sheets of 20lb paper
Shred Size............................................................................7mm
Paper Cut.......................................................................Strip-Cut
MPS1440.O/M.QXD 8/12/02 11:33 AM Page 5