Filter
Top Products
5
OPERATION
If a paper jam occurs, slide the
AUTO/OFF/REV switch to the REV
(Reverse) position to withdraw the
non-shredded paper. If paper still
remains in the shredder, press the
CLEAR button to shred and clear
the remaining pages.
1
REMOVING PAPER JAMS:
To turn the shredder off, simply
slide the AUTO/OFF/REV switch to
the OFF position; the POWER
indicator will go off.
1
TO TURN THE SHREDDER OFF
SPECIFICATIONS
On occasion, paper strips get stuck
in the shredder. In this case, slide
the AUTO/OFF/REV switch to the
REV position for 2 to 3 seconds.
Then, slide the AUTO/OFF/REV
switch back to the AUTO position
and press the CLEAR button for 2
to 3 seconds. Repeat this
procedure one to two times to fully
clear the paper tips.
1
PAPER TIP SOLUTION
Power Source......................................................120V AC, 60Hz
Shred capacity...............................5 single sheets of 20lb paper
Shred Size................................................................1/6” x 1-1/2”
Paper Cut.....................................................................Cross-Cut
MPS2800.O/M.QXD 8/12/02 11:35 AM Page 5