Memorex MX2710 Mouse User Manual


 
D. Installing the Keyboard
USB 1.1 or 2.0 Port
The keyboard cable can also be plugged into the included USB-to-
PS/2 adapter so that the keyboard can be attached to a PS/2 port.
The USB port is a rectangular socket with a USB logo next to it.
Please note that USB is only supported properly by Windows
98SE/Me/2000/XP; if your operating system is Windows 98 or NT,
you will have to use the PS/2 connector for the keyboard. The
Memorex keyboard works equally well with either USB 1.1 or 2.0,
and there is no difference in performance between the two.
The keyboard will work with your computer at this point, but you will
need to install the software drivers on the included CD in order to take
advantage of the special features your keyboard offers.
E. Installing the Keyboard Software
In order to avoid conflicts with previously installed keyboard drivers and
software, you will need to delete the following files by right-clicking on MY
COMPUTER and then clicking on PROPERTIES.
Step 1. Remove the old keyboard drivers
Win 98SE, Me: select the DEVICE MANAGER tab; look for the
KEYBOARD listing under the devices. Double-click on KEYBOARD,
then right-click on the device that is listed. Select REMOVE to
delete the driver
. If ther
e is mor
e than one keyboard device listed,
remove the drivers for each one in the same manner.
USB to PS/2
Adapter