Filter
Top Products
Mercury 8/16 User’s Manual
8
Step 5
Each PC port connector is HDDB-15 pin type. Locate your input cable. It will
have a HDDB-15 pin male connector at one end. Plug it into any label computer
port on the rear of KVM switch unit. The other end of input cable will have three
connectors: a HDDB-15 pin male type for PC video, a Mini Din 6 pin female type
for keyboard and a Mini Din 6 pin female type for mouse. To plug these three
connectors into the respective ports of computer. Repeat the same procedure to
all of PCs.
Figure 2-5. Connect PC
Step 6
Double-check all of the connections. You can check the color of keyboard and
mouse connector to make sure the keyboard and mouse cables go to the correct
ports.
Step 7
Attach the power supply to the KVM unit and plug the other end into an electrical
receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep.
Switch on your monitor.
Please be remind to plug in power adapter. Although the PCs
connected to KVM Switch are able to support enough power to the
stand alone switch, KVM Switch still needs a power adapter for
daisy chain more banks. If you forgot to plug in power adapter on
the status of daisy chain, it may cause the unexpected status
occurred.