Filter
Top Products
Controlling CenturyStack Hubs 29
Repeater Port Control-2
To configure repeater ports, first select the group (1 – 6) and select
Submit to load the configurations for the selected group. Next select the
port of the selected group that is to be configured. Then configure the
items listed below and select Save to update the new configuration.
Repeat for each port of each group.
Repeater Port Control
Port Number 1 – 12/24
Admin State Enable/Disable/No Change
Link Test Enable/Disable
Speed Control Auto Negotiate/10 Mbps/100 Mbps/
No Change
Link Status Change Notify Enabled/Disabled/No Change