Metrologic Instruments IS4110 Scanner User Manual


 
5
IR SENSOR ACTIVATION
An infrared (IR) sensor located behind the scanner window initiates the scanning
process. In short range mode the signal projects approximately 101.61 mm –
177.84 mm (4" – 7") beyond the output window. In long range mode the signal
projects approximately 228.61 mm – 330.21 mm (9" – 13") beyond the output
window. The IR sensor remains active as long as the unit is powered.
When the unit remains dormant for a time, the laser will turn off. In this stage, the
scan engine’s computer is on “standby”. To reactivate the unit, present an object
within the scan field.
APPLICATIONS AND PROTOCOLS
The model number on each scan engine includes the scan engine number and
communications protocol.
Unit Communication Protocol(s) Type
IS4110 Laser Data Non-decode
IS4125-41
RS232 and Light Pen Emulation
(Flash Upgradeable Firmware)
IS4125-17
Keyboard Wedge, Stand Alone Keyboard
(Flash Upgradeable Firmware)
IS4125-38
Low Speed USB
Keyboard Emulation or Serial Emulation Mode
IS4125-103 TTL, RS232
Decode