Filter
Top Products
7
IS4823 and IS4825 Bracketed (-1 and -2) Dimensions
The engine bracket has three M2 x 0.4 threaded inserts on the bottom for mounting the assembly with screws.
Two through holes are also provided as an alternative mounting method.
Warning: The limited warranty (on page 37) is void if the following recommendations are not adhered to
when mounting the IS4800 series laser scan engine.
When securing the engine by utilizing the three M2 threaded inserts:
• Use M2 x 0.4 Phillips Pan Head, Type AB, Steel, Zinc Clear or equivalent screws.
• Do not exceed 2.88 cm-kg [ 2.5 in-lb ] of torque when securing the engine assembly to the host.
• Use a minimum mount thickness of 3 mm.
• Use safe ESD practices when handling and mounting the engine assembly.
Figure 9. IS4823/IS4825 Bracketed (-1 and -2) Dimensions
Specifications are for reference only and are subject to change without notice.