MetroSelect
™
G-9
Enable XON/XOFF Handshaking
When enabled, the scanner will stop
transmission whenever an XOFF
( A S C I I 13H) is received. Tr a n s m i s s i o n
will resume after an XON (ASCII 11H) is
re c e i v e d .
*Disable XON/XOFF Handshaking
The scanner will not test for XON/XOFF.
*Disable ACK/NAK
Do not support ACK/NAK handshaking.
Enable ACK/NAK
After transmitting data, wait for an ACK
(06H) or a NAK (15H) response from the
host. If ACK is received, complete the
communications cycle and look for more
bar codes. IF NAK is received, re t r a n s m i t
the last set of bar code data and wait for
ACK/NAK again.
Software Handshaking
115914
115904
115913
115903