Filter
Top Products
30
DEFAULT SETTINGS
Many functions of the scanner and cradle can be “programmed” – that is,
enabled or disabled. The scanner and cradle are shipped from the factory
programmed to a set of default conditions. The default parameter has an
asterisk (*) in the charts on the following pages. If an asterisk is not in the default
column then the default setting is OFF or DISABLED. Every communication
does not support every parameter. If the communication supports a parameter
listed in the charts on the following pages, a check mark will appear.
PARAMETER DEFAULT RS-232
LIGHT
PEN
IBM
46XX
KBW USB
Normal Scan Mode * 9999 9
Continuous Scan Mode
9999 9
Blinky Scan 9999 9
Continuous Blinky Scan 9999 9
Custom (one shot) Scan 9999 9
Long-Range In-Stand *
9999 9
Short-Range In-Stand 9999 9
Long-Range Out-of-Stand * 9999 9
Short-Range Out-of-Stand 9999 9
CodeGate Active In-Stand
9999 9
CodeGate Inactive In-Stand * 9999 9
CodeGate Active
Out-of Stand
*
9999 9
CodeGate Inactive
Out-of Stand
9999 9
UPC/EAN * 9999 9
Code 128 *
9999 9
Code 93 * 9999 9
Codabar * 9999 9
Interleaved 2 of 5 (ITF) * 9999 9
MOD 10 check on ITF
9999 9
Code 11 9999 9
Code 39 * 9999 9
Full ASCII Code 39 9999 9