Filter
Top Products
3-7
BIOS Setup
LBA/Large Mode
This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA
mode if the device supports it and the devices is not already formatted with LBA
mode disabled.
DMA Mode
Select DMA Mode.
Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting
Technology) capability for the hard disks. S.M.A.R.T. is a utility that monitors
your disk status to predict hard disk failure. This gives you an opportunity to
move data from a hard disk that is going to fail to a safe place before the hard
disk becomes offline.
Floppy A
This item allows you to set the type of floppy drives installed. Available options:
[None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].
Important
SATA1~6 are appearing when you connect the HD devices to the SATA con-
nector on the mainboard.
Due to the IDE1 & SATA7 is controlled by Marvell 88SE6111, the BIOS will
not detect the IDE & SATA device and will not show the status.
This sub-menu shows the CPU information, BIOS version and memory status of your
system (read only).
System Information
Press <Enter> to enter the sub-menu, and the following screen appears.