Filter
Top Products
Orbit II Disc-to-Disc Copier Reference Manual – Revision I
23
5.8 Writer and Reader Test:
This final trial run will verify that your new Orbit II has not suffered any shipping damage that affects either
the Writer or the Reader. You will make a back up copy of the Orbit II distribution CD-R, and you will
compare the copy to the master CD-R. You must first change Orbit II’s Setup so that Burn CD? is turned
on:
Turn Burn CD? on:
• Press the No key at the , ,
Copy CD-to-CD?
Copy &
Compare?
and Copy & prompts.
Compare CD?
• Press the Yes key at the , ,
, , and
prompts.
48x Write?
Use Buzzer?
System Setup?
Ask Quantity?
BurnCD?
This sequence will return you to the prompt with Burn CD? on.
Copy CD-to-CD?
Copy the distribution disc:
• Make sure there is one blank (unrecorded) CD-R in the Input Hopper.
• Press the Yes key at the prompt.
• When the prompt appears, press Yes to accept the “10s”
digit setting of “0”. The underline cursor will move to the “1s” digit. Press the No key once
to set the “1s” digit to “1”. Press Yes to accept the “1s” digit setting of “1”.
Quantity? 00
Copy CD-to-CD?
• When the CD Reader tray opens, place the Orbit II distribution disc in the CD Reader tray and
press Yes .
• Orbit II will copy the distribution disc to the blank CD-R and place it in the Accept Basket.