Filter
Top Products
<Cable Connection> test reminds you that the connection link
might be fail, either the cable is not connected or the cable link
fails.
For the <Run Diagnostics on Network> test, it is necessary to
connect your computer with its supporting hub or another
computer. This is a "Ping-Pong" test. This test cannot be
completed except two computers on the LAN for sending or
receiving the test packets between computers.
For the <Run Diagnostics On Network> test
2.7 Specifications
2.7 Specifications2.7 Specifications
2.7 Specifications
Standards
IEEE 802.3u 100BASE-FX
PCI Specifications Revision 2.1
Speed
200Mbps full-duplex
100Mbps half-duplex
Performance
148,800pps for 100Mbps
Fiber Cable
62/125µm multi-mode fiber-optic
cable, up to 2 km
Wavelength
1300nm
LED Indicators
LNK (Link) /ACT (Activity)
Dimensions
136 mm × 89 mm
Net Weight
90g approx.
Power Consumption
5VDC, 500mA max.
Operating Temperature
0°C to 40° C (32°F to 104°F)
Storage Temperature
-25°C to 70°C (-13°F to 158°F)
Humidity
10%-90% non-condensing
N
etwork
Ethernet Address
00E07DC00002
Tar
g
et Machine
Ethernet Address
00E07DC00001
Master Machine