Filter
Top Products
46
3
Award BIOS Setup Utility
Standby Mode
This is user configurable only when the Power Management category
is set to User Defined. When enabled and after the set time of system
inactivity, the CPU clock will run at a slower speed (1/3 of full speed)
while all other devices still operate at full speed.
Suspend Mode
This is user configurable only when the Power Management category
is set to User Defined. When enabled and after the set time of system
inactivity, the CPU and onboard peripherals will be shut off.
HDD Power Down
This is user configurable only when the Power Management category
is set to User Defined. When enabled and after the set time of system
inactivity, the hard disk drive will be powered down while all other
devices remain active.
Soft-Off by PWRBTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec. Regardless of whether the Power Management field is
enabled or disabled, if the power button is pushed
and released in less than 4 sec, the system enters the
Suspend mode. The purpose of this function is to
prevent the system from powering off in case you
accidentally hit or pushed the power button. Pushing
the power button for more than 4 seconds will
power off the system.
Instant-Off Pressing and then releasing the power button at
once will immediately power off your system.