![](http://pdfasset.owneriq.net/d/f7/df77a1c5-1884-4b12-ba0b-02bc614f6a7e/df77a1c5-1884-4b12-ba0b-02bc614f6a7e-bg8.png)
On Green
The port is successfully connecting with the
device.
Blinking The port is receiving or transmitting data.
LINK/ACT
Off The port does not link successfully with the device.
Installation
Apply self-adherent rubber feet to the bottom of the Switch near each of the four corners.
See Figure 6.
6
If applying Switch to metal surface, install magnets as shown in Figure 6. Switch may
then be installed on a metal surface.
Plug in power adapter.
Trouble Shooting
8