Filter
Top Products
Segment Application
Any of the RJ-45 ports on the MIL-S801XX switch can connect with other
switches or Hubs to interconnect small workgroups to form larger switched
networks. You can also use fiber ports to connect switches. The distance
between two switches via fiber cable can be up to 2Km or up to 60Km (SC
single-mode fiber connector).
For enterprise networks where large data broadcast are constantly processed,
this switch is suitable for a department connection to the corporate backbone.
In the following illustration, two MIL-S801XX switches are used to
interconnect two small workgroups. All the devices in this network can
communicate with each other. Connecting servers to the switch allow other
users to access the server’s data.
Figure 3-2 Segment Application