Filter
Top Products
Features
Auto-Negotiation
Auto MDI/MDIX
Administrative Port Control
Full/Half duplex Flow Control
VLANs:Supports Port-based VLAN groups and overlapping VLAN groups
Port Trunking: Supports up to 4 port trunks
SNMP: MIB II support
Disable/Enable settings for every port
Port settings for duplex and speed
Management
DHCP/BootP Client
Telnet
Web-based management
VT100 emulation through console port
SNMPv1
MIBII support
Password security
Management security with IP access
Packet Statistics
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
RFC 1213 SNMP MIB
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 826 ARP
RFC 854 TELNET
RFC 2068 HTTP
Fiber Port Options
SC/ST Connector Multi-mode
Speed: 100BASE-FX
Wavelength: 1300nm
Average Launch Power (dBm): -18
Average Sensitivity (dBm): -30
Average Power Loss Budget (dBm): 12
Max Fiber Distance: 2km
Fiber Size: 62.5/125, 50/125
MT-RJ Connector Multi-mode
Speed: 100BASE-FX
Wavelength: 1300nm
Average Launch Power (dBm): -15.7
Average Sensitivity (dBm): -33.5
Average Power Loss Budget (dBm): 17.8
Max Fiber Distance: 2km
Fiber Size: 62.5/125, 50/125
VF-45 Connector Multi-mode
Speed: 100BASE-FX
Wavelength: 1300nm
Average Launch Power (dBm): -16
Average Sensitivity (dBm): -33
Average Power Loss Budget (dBm): 17
Max Fiber Distance: 2km
Fiber Size: 62.5/125, 50/125
SC Connector Single mode
Speed: 100BASE-FX
Wavelength: 1300nm
Average Launch Power (dBm): -6
Average Sensitivity (dBm): -34
Average Power Loss Budget (dBm): 28
Max Fiber Distance: 60km
Fiber Size: 8/125, 9/125
Ports
8 fixed 10/100BASE-TX ports:RJ-45 connectors
1 fixed 100BASE-FX port (MIL-SM801):
Optional single-mode or multi-mode
Optional ST, SC, MT-RJ or VF-45 connector
RS232C serial console with DB-9 connector
System LEDs: Power, Speed, Link, Activity, and Duplex
Architecture: 1.8 Gbps switch fabric
Packet Forwarding: Store-and-Forward
Address Support: 8K MAC entry
Operating Temperature: 0 to 45°C ( 32°F to 113°F )
Storage Temperature: -25°C to 70°C ( -13°F to 158°F )
Operating Humidity: 10% to 90% ( non-condensing)
Internal power: Autosensing 100-240VAC Country Specific Power Supply@
50-60Hz
Power Consumption: 17 Watts maximum
Power Adapters Available: North America, Continental Europe, United
Kingdom
Dimensions: 250 mm x 132 mm x 37 mm ( 9.8” W x 5.2" D x 1.5" H)
Weight: 3.5 lbs. (1080 g)
Chassis: Metal
Mounting: Desktop rubber feet included
Safety: UL 1950,
Emissions: FCC Class A, CSA C22.2, No950 EN60950, CE, EN55022, Class
A, EN55024
Ordering Information
MIL-SM801ST: (8)10/100BASE-TX & (1)100BASE-FX ST MMF 2 km
MIL-SM801SC: (8)10/100BASE-TX & (1)100BASE-FX SC MMF 2 km
MIL-SM801MT: (8)10/100BASE-TX & (1)100BASE-FX MTRJ MMF 2 km
MIL-SM801VF: (8)10/100BASE-TX & (1)100BASE-FX VF45 MMF 2 km
MIL-SM801SC-60: (8)10/100BASE-TX & (1)100BASE-FX SC SMF up to 60
km
Warranty
Comprehensive 5 years
Managed 10/100Mbps Switch with Fiber
MIL-SM801 Series
MiLAN Technology
1329 Moffett Park Drive
Sunnyvale, CA 94089
1-800-466-4526
www.milan.com
Milan Technology reserves the right to change specifications or other product information without notice. This publication could include technical
inaccuracies or typographical errors. Milan Technology provides this publication “as is” without warranty of any kind, either expressed or implied,
including implied warranties of merchantability or fitness for a particular purpose. If your jurisdiction does not allow disclaimer of expressed or implied
warranties in certain transactions, this disclaimer may not be applicable.
Milan Technology, the Milan Technology logo are trademarks.
All other trademarks are the property of their respective holders.
® Copyright 2002 MiLAN Technology P/N 91001094_B