Milan Technology MIL-SME801P Switch User Manual


 
93
5-2. Port Status
State:
Displays port status off or on depending on user setting. “Unlink”
means the port is offline or “off ”.
Link Status:
Down is “No Link”, UP is “Link”.
Auto Negotiation:
Displays the auto negotiation mode. There are three
selections: Auto, Force and Nway-force.
Speed status:
Displays link speeds of 100Mbps or 10Mbps.
Duplex status:
Displays full-duplex or half-duplex mode.
Flow Control:
Displays the flow control status as enabled or disabled in
full-duplex mode.
Backpressure:
Displays the backpressure status as enabled or disabled in
half-duplex mode.
Rate Control:
Displays the rate control setting.
Ingr: Displays the port effective ingress rate of user settings in
increments of 100 Kbps.
Egr: Display the port effective egress rate of user settings in
increments of 100 Kbps.
Priority:
Displays the port static priority status as High or Low or Disabled.
Port Security:
Displays the port security as enabled or disabled.
Config:
Displays the setting configured by the user.
Actual:
Displays the negotiation result.