Filter
Top Products
NDM-FTX Series Fast Ethernet Dual Media NIC
6
Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours
Troubleshooting
Diagnostics LEDs and Boot ROM
LEDS
The LINK/ACT LED lights when a fiber cable or twisted pair cable connection
is good. It blinks to indicate activity.
The collision and full-duplex LED report board operating status.
Boot ROM
To add the remote boot feature to a workstation, insert the Boot ROM into the
ROM socket. See Figure 1 on page 2.
After power UP, the LINK/ACT LED should light; if not, check the following:
1 Confirm that the NDM-FTX module is properly inserted into the PC
workstation master slot or file-server master slot.
2 Confirm that the PC workstation or the file server is properly connected to
a power source and with the power source turned ON.
3 Check the fiber cable and twisted-pair copper cables for proper connection.
4 Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600 if those
steps fail to produce the desired result.
Note: To connect this device to a router, bridge, or switch, please refer to the
corresponding technical manual for the device.
Declaration of Conformity
Name of Mfg: Transition Networks, 6475 City West Parkway,
Minneapolis, MN 55344 U.S.A.
Model: NDM-FTX-xxxxx-0l and NDM-FTX-xxxxx-0l(L) Network Interface
Cards
Part Number: NDM-FTX-ST-01(x), NDM-FTX-SC-01(x), NDM-FTX-MT-01(x),
NDM-FTX-SC5-01(x), NDM-FTX-SC20-01(x),
NDM-FTX-SB201-01(x), NDM-FTX-SB202-01(x)
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the NDM-FTX-xxxxx-01 and NDM-FTX-xxxxx-0l(L), to
which this declaration refers, is in conformity with the following
standards:
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; FCC Part 15 Subpart B; 21CFR
subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standard(s).
June 30, 2005
Stephen Anderson, Vice-President of Engineering Date
7
techsupport@transition.com -- Click the “Transition Now” link for live Web chat.
Contact Us
Technical support
Technical support is available at techsupport@transition.com
• US and Canada: 1-800-260-1312 (24 hours)
• International: 00-1-952-941-7600 (24 hours)
Transition now
Chat live via the Web with Transition Networks Technical Support. Log onto
www.transition.com and click the Transition Now link.
Web-based seminar
Transition networks provides seminars via live, web-based training. Log onto
www.transition.com and click the Learning Center link.
Email
Ask a question anytime by sending an email to our technical support staff:
techsupport@transition.com
Address
Transition Networks
6475 City West Parkway
Minneapolis, MN 55344, U.S.A.
Telephone: 952-941-7600,
Toll free: 800-526-9267
Fax: 952-941-2322