Filter
Top Products
SMART 216 / 232
29
From In the Settings window you can do the following:
HOT KEY – By pressing Shift, Shift the OSD appears. You can replace Shift,
Shift with any of the following:
• Ctrl, Ctrl
• Ctrl, F11
• Print Screen
Press the Spacebar to toggle between options.
To display the OSD press the new hotkey.
KEYBOARD LANGUAGE - Press the Spacebar to toggle between the language
options. It can be changed to French or German.
22.7 DDC – F10
Display Data Channel (DDC) is a VESA standard for communication between a
monitor and a video adapter.
From the Settings window, input the DDC information of the monitor connected to
the Smart 216 switch into the memories of all connected ROCs when first installing
system.
To input the DDC information:
Press F10. “Please wait” flashes a few times and disappears. The monitor’s DDC
information is sent to all ROCs and stored in their memory.
22.7.1.1 Updating the DDC information
Update the DDC information in any of the following circumstances:
• When replacing the monitor connected to Smart 216 Switch
• When adding a new ROC to the system
• When reconnecting an existing ROC that was temporarily used in a
different system
To update the DDC information, repeat the steps as set out above.
22.8 Saving changes to the settings
To save changes to the settings and return to the Main window, press Esc.