Filter
Top Products
4
3. Connect the computer end of the D-
SUB cable to the 15-pin output
connector on the video board of your
computer.
4. Turn the monitor and the computer
on.
If you wish to connect the monitor to an older-type Apple Macintosh, you
need to use a Macintosh cable adapter to connect the video signal cable of
your monitor to the video port of the computer. Your computer dealer should
be able to supply you with a suitable adaptor.
Drivers for Windows 95, 98, 2000, XP and Millennium
Edition
Windows will detect the Diamond View 1998E monitor the first time you turn
the computer on after installing it. The Add New Hardware wizard will prompt
for drivers. Install the standard Windows Plug & Play Monitor driver. This
driver will work correctly and allow you to use the monitor with its optimal
resolutions and refresh rates.
A specific driver that includes the Windows ICC/ICM colour profile for the
Diamond View 1998E is available from Mitsubishi Electric Australia’s web
site at
http://www.mitsubishi-electric.com.au
Follow the link to the File Downloads/Monitors section of the site to download
the drivers. Installation instructions are also available from the monitor driver
page.