Filter
Top Products
EN-6
MENUEXIT
(7) (6) (5) (4) (3) (2) (8)(1)
Parts Name and Functions
(1) POWER button ( )
Switches the power on/off.
(2) MENU button
Activates the menu when the menu is turned-off.
(3) PLUS (+) button
Acts as (+) button to increase the adjustment with menu.
(4) MINUS (-) button
Acts as (-) button to decrease the adjustment with menu.
(5) UP ( ) button
Acts as button to move the highlighted area up to select the
adjustment with menu.
(6) DOWN ( ) button
Acts as button to move the highlighted area down to select
the adjustment with menu.
(7) EXIT button
Acts as EXIT button to move to previous menu with menu.
(8) Remote control sensor and power lamp
Receives the signal from the remote control (when using the
optional wireless remote control). During start-up, it will blink
green. Glows red when the LCD is in stand-by mode and
glows green when the monitor is in active. When the LCD is
in power save mode, it will glow both green and red. In the
case of where a failure is detected, it will blink red. (Refer to
page 11.)
Front panel