Mitsubishi Electronics AJ71QE71N-B5T Network Card User Manual


  Open as PDF
of 6
 
2
[New Features]
(1) Increased range of connections to match the system configuration.
With the introduction of the 10BASE-T connection Ethernet interface module (hereinafter, Ethernet
module), the PLC and personal computer can now be connected with 10BASE5, 10BASE2, or 10BASE-T.
New product Old product
Interface (*1) Interface (*1)
Type
10BASE2 10BASE5 10BASE-T
Type
10BASE2 10BASE5 10BASE-T
AJ71QE71N-B2 ! N/A N/A AJ71QE71 ! ! N/A
AJ71QE71N-B5T N/A ! ! AJ71QE71-B5 N/A ! N/A
A1SJ71QE71N-B2 ! N/A N/A A1SJ71QE71-B2 ! N/A N/A
QnA
Series
A1SJ71QE71N-B5T N/A ! ! A1SJ71QE71-B5 N/A ! N/A
AJ71E71N-B2 ! N/A N/A
AJ71E71N-B5T N/A ! !
AJ71E71-S3 ! ! N/A
A1SJ71E71N-B2 ! N/A N/A A1SJ71E71-B2-S3 ! N/A N/A
A
Series
A1SJ71E71N-B5T N/A ! ! A1SJ71E71-B5-S3 N/A ! N/A
*1. Indicates the communication interface for the corresponding unit. (!: Available)
(2) High-speed internal processing
With the Ethernet module's faster internal processing, the PLC responds much faster when exchanging
data with an external device.
The following table shows the minimum transmission delay time (reference value) on the PLC side when
using each communication function.
(This is based on the PLC CPU scan time of 10ms.)
QnA Series A Series
Communication function Outline of communication process
New
product
Old
product
New
product
Old
product
Using read/write data in
the PLC CPU
UDP/IP communicationCommunication with binary
code dataReading of D0 to D99
27 43 40 56
Using fixed buffers
TCP/IP communicationCommunication with binary
code dataCommunication of 1017 words of data
65 118 65 118
Using random access
buffers
UDP/IP communicationCommunication with ASCII
code dataReading of 508 words of data
10 42 10 42
(Unit: ms)
 previous next