Mitsubishi Electronics ES100 Projector User Manual


 
EN - 21
ENGLISH
PASSWORD
CONFIRM
O K CANCEL
MENU ACCESS
XGA60
opt.
LOCK
UNLOCK
OK
OK
PASSWORD
O K CANCEL
Password function
This projector is equipped with the password func-
tion that is designed for prevention of wrong operation
by children and restriction on operation by other than
specifi ed users.
MENU ACCESS ............All the buttons except for the
POWER button on the projector are disabled. (The
buttons on the remote control are enabled.) You can
use this mode as a measure of prevention of wrong
operation by children and restriction on operation by
other than specifi ed users.
To enable the password function:
1. Display the FEATURE menu.
2. Press the or button to select PASSWORD
FUNCTION.
3. Press the ENTER button.
The screen for setting the password function will
appear.
When the password has already been set, the
mode won't be changed. In such cases, press the
ENTER button to cancel the password function
and try again.
4. Press the ENTER button.
The screen for entering a password will appear.
5. Press the or button to select a number from 0
to 9.
6. Press the button.
You can set the next digit.
7. Repeat steps 5 and 6 to set a four-digit password.
8. Enter the password again for confi rmation using the
same steps.
9. Select OK, and press the ENTER button.
If the entered passwords don't match, an error
message will appear.
To cancel the procedure, select CANCEL, and
press the ENTER button.
You can cancel the procedure by pressing the
MENU button alternatively.
To cancel the password function:
1. Display the FEATURE menu.
2. Press the or button to select PASSWORD
FUNCTION.
3. Press the ENTER button.
The screen for canceling the password function
will appear.
4. Press the ENTER button.
The screen for entering the password will appear.
5. Press the or button to select a number from 0
to 9.
6. Press the button.
You can set the next digit.
7. Repeat steps 5 and 6 to enter the four-digit pass-
word.
8. Press the button, select OK, and press the ENTER
button.
If you enter a wrong password, an error message
will appear.
To cancel the procedure, press the button,
select CANCEL, and press the ENTER button.
You can cancel the procedure by pressing the
MENU button alternatively.
Important:
If you forget your password, keep pressing the
MENU and ENTER buttons on the control panel at
the same time about three seconds to cancel the
password function.
MENU ACCESS
XGA60
opt.
LOCK
UNLOCK
OK
OK