Filter
Top Products
EN-33
Password function
This projector is equipped with the password function
that is designed for prevention of wrong operation by
children and restriction on operation by other than
specifi ed users.
DISPLAY INPUT
When the projector is turned on, the startup screen
(or splash screen) will appear and stay on the screen
until the password is entered. When the password is
entered, the startup screen will switch to the regular
operation screen.
MENU ACCESS
Only the following menus become available.
•
COLOR ENHANCER, CONTRAST, and
BRIGHTNESS in the IMAGE menu
•
MENU ACCESS of PASSWORD FUNCTION in the
FEATURE menu
•
INFORMATION menu
User can control the menus in a very simple way.
SPLASH ID SCREEN
IMAGE CAPTURE and SPLASH SCREEN in the
INSTALLATION menu become unavailable. SPLASH
SCREEN will be set to ON automatically.
To enable the password function:
1. Display the FEATURE menu.
2. Press the
S
or
T
button to select PASSWORD
FUNCTION.
3. Press the W or X button to change the mode
among DISPLAY INPUT , MENU ACCESS and
SPLASH ID SCREEN .
• When the password has already been set, the
mode won’t be changed. In such cases, press
the ENTER button to cancel the password func-
tion and try again.
4. Press the ENTER button.
• The screen for setting the password function will
appear.
MENU ACCESS
FEATURE
opt.
LOCK
UNLOCK
OK
OK
5. Press the ENTER button.
• The screen for entering a password will appear.
PASSWORD
CONFIRM
1
3
24
O K : ENTER CANCEL : MENU
6. Enter a 4 - 8 digit password using the
S
,
X
,
T
or
W
button on the remote control as shown below.
(
S
=1,
X
=2,
T
=3,
W
=4)
Advanced features (continued)
7. Press the ENTER button.
• To cancel the procedure, press the MENU
button.
8. Enter the password again for confi rmation using the
same steps.
9. Press the ENTER button.
• If the entered passwords don’t match, an error
message will appear.
• To cancel the procedure, press the MENU
button.
To cancel the password function:
1. Display the FEATURE menu.
2. Press the
S
or
T
button to select PASSWORD
FUNCTION.
3. Press the ENTER button.
• The screen for canceling the password function
will appear.
MENU ACCESS
FEATURE
opt.
LOCK
UNLOCK
OK
OK
4. Press the ENTER button.
• The screen for entering the password will
appear.
PASSWORD
1
3
24
O K : ENTER CANCEL : MENU
5. Enter a 4 - 8 digit password using the
S
,
X
,
T
or
W
button on the remote control as shown below.
(
S
=1,
X
=2,
T
=3,
W
=4)
6. Press the ENTER button.
• If you enter a wrong password, an error message
will appear.
• To cancel the procedure, press the MENU
button.
Important:
• Disable the password by pressing the MENU and
ENTER buttons on the control panel at the same
time about three seconds.