Filter
Top Products
12
Connecting your Macintosh
®
computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers
may not display images correctly.
•To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to
mini D-sub 15 pin).
For older Macintosh
®
computers, use Macintosh cable adapter to connect to your Macintosh's video port.
NOTE: To obtain the Macintosh cable adapter call Mitsubishi Digital Electronics America, Inc. at (888) 307-0309
•To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use the signal cable available separately (mini D-sub 15 pin to
BNC x 5).
• If you use with a Macintosh PowerBook, set "Mirroring" to off.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any special
identification or configuring your monitor's image and monitor may require.
• The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.
BNC x 5
Mini D-sub
15 pin
BNC x 5
LCD monitor (second monitor)
BNC x 5
Macintosh
To RGB3 DVD/HD IN
LCD monitor
Mini D-sub 15 pin
To analog RGB output
To audio output
EXIT MUTEINPUT
Connecting to a Macintosh
®
Computer
Connections –continued