Filter
Top Products
5
Controls – continued
Size and Position Controls
Left/Right: Moves the image horizontally (left or right).
Down/Up: Moves the image vertically (up or down).
Narrow/Wide: Decreases or increases the horizontal size of the
image.
Short/Tall: Decreases or increases the vertical size of the image.
Color Control System
Colour presets selects the desired colour setting. The bar is replaced
by the colour setting choice. Each colour setting is adjusted at the
factory to the stated Kelvin. If a setting is adjusted, the name of the
setting will change from Kelvin to Custom except sRGB mode.
Red, Green, Blue: Color Control System decreases or increases
the monitor’s red, green or blue colour guns depending upon which
is selected. The change in colour will appear on screen and the
direction (decrease or increase) will be shown by the bars.
sRGB mode: sRGB mode provides the suitable colour managed
picture image. You can not change Red, Green and Blue colours,
brightness and contrast individually.
Colour Temperature Adjustment: Adjusts the colour temperature
of the screen image.
Geometry Controls
Geometry Controls Menu
The Geometry controls allow you to adjust the curvature or angle of
the sides of your display.
Sides In/Out (pincushion): Decreases or increases the curvature
of the sides either inward or outward.
Sides Left/Right (pincushion balance): Decreases or increases
the curvature of the sides either to the left or right.
Sides Tilt (parallelogram): Decreases or increases the tilt of the
sides either to the left or right.
Sides Align (trapezoidal): Decreases or increases the bottom of
the screen to be the same as the top.
Rotate (raster rotation): Rotates the entire display clockwise or
counterclockwise.
Corner Correction: Allows you to adjust the geometry of the corners
of your display – Top or Bottom.
Tools 1
Moiré Canceler: Moiré is a wavy pattern which can sometimes
appear on the screen. The pattern is repetitive and superimposed
as rippled images. When running certain applications, the wavy
pattern is more evident than in others. To reduce moiré, adjust the
level by using –/+ CONTROL buttons.
Linearity: This selection allows you to adjust the spacing of the
area on the screen. The purpose of this control is to ensure that a
one-inch circle is a true one-inch circle wherever it is on the screen.
The best way to determine the vertical linearity is as follows:
• Draw equally spaced horizontal lines using a drawing applica-
tion that has a ruler.
• Use the Vertical Balance control to adjust the lines near the top
and bottom of your screen.
• Use the LINEARITY (VER.) control to adjust the spacing between
the lines near the center and top of your screen.
Convergence: Aligns all three colors (R,G,B) to form a single color
(white). The purpose of this control is to ensure that a white line
drawn on the screen is as crisp and clear as possible.
• Use the CONVERGENCE (HOR.) control to adjust the alignment of
the lines in the up/down direction.
• Use the CONVERGENCE (VER.) control to adjust the alignment of
the lines in the left/right direction.
GlobalSync Control: Eliminates picture impurities that may result
from the earth’s magnetic field. While in the sub-menus
(GLOBALSYNC, TOP LEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM
RIGHT), use the –/+ control buttons to fine tune the GlobalSync
corrections.
NOTE: Mitsubishi recommends that you perform GlobalSync
correction while running a typical application such as a
spreadsheet or text document.
Tools 2
Language: OSM controls menus are available in 6 languages.
OSM Position: You can choose where you would like the
OSM controls menu to appear on your screen. Selecting
OSM Position allows you to manually adjust the OSM controls menu
position from among Center, Top left, Top right, Bottom left and Bottom
right.
OSM Turn Off: The OSM controls menu will stay on as long as it is in
use. In the OSM Turn Off sub-menu, you can select how long the
monitor waits after the last touch of a button for the OSM controls
menu to disappear. The preset choices are 5 thru 120 seconds.
OSM Lock Out: This control completely locks out access to all OSM
controls functions except Brightness and Contrast. When attempting
to activate OSM controls while in the lock out mode, a screen will
appear indicating that OSM controls are locked out. To activate the
OSM Lock Out function, press SELECT and hold + down
simultaneously. To deactivate the OSM Lock Out, press SELECT
and hold + down simultaneously.
IPM System Off Mode:
Enable: The IPM System works normally and all stages of energy
savings are utilized.
Disable: The Off Mode of the IPM System is not used.
NOTE: For standard systems and graphics boards, keep the factory
setting at ENABLE.
NOTE: Do not keep the monitor on when ‘No Signal’ is applied.
This could cause image burn-in on the screen due to the
‘No Signal’ message being displayed.
EdgeLock Control: Operating your monitor at a nonstandard timing
may cause images to appear darker than normal or have color
distortion. Use of the EdgeLock control will adjust images to their
normal state.
Hot Key: This selection allows you to use
/
as brightness control
and –/+ as contrast control. When Hot key function is set to “ON”,
accessing the OSD is only possible with the “EXIT” button.
Factory Preset: Selecting Factory Preset allows you a reset most
OSM control settings back to the factory settings. A warning statement
will appear to confirm that you do want to reset ALL settings. Individual
settings can be reset by highlighting the control to be reset and
pressing the RESET button.
Information
Display Mode: Indicates the current mode and frequency setting of
the monitor.
Monitor Info: Indicates the model and serial numbers of your monitor.
Refresh Notifier: A message will advise you if the refresh rate of the
signal being applied to the monitor by the computer is too low. For
further information, please refer to your display card or system
manual.
ENERGYSTAR Product
As an ENERGYSTAR Partner,
NEC-Mitsubishi Electronics Display of America, Inc. has
determined that this product meets the E
NERGYSTAR guidelines for
energy efficiency. The E
NERGYSTAR emblem does not represent
EPA endorsement of any product or service.
English