Mitsubishi Electronics UD8350U Projector User Manual


 
Edge Blending
Edge blending creates a seamless image by adjust-
ing the brightness at adjoining edges when using
multiple projectors side-by-side to reproduce single
widescreen images. This feature can also be uti-
lized for top-bottom projection or a combination of
side-by-side and top-bottom images; for example,
when images are projected from four projectors in
a two-by-two arrangement.
Multi-screen Solutions
Color Matching
The use of multiple projectors to create a larger
image can result in color variations due to slight dif-
ferences in projector image processing. The UD8350U
Series is equipped with a color matching function
that resolves this problem. Each projector is ad-
justed so that the same colors are reproduced when
multiple projectors are used simultaneously.
Ample Features for Increased Expressiveness and Operation Ease
Color matching function
The dual lamp system and lamp relay function enable continuous operation with
no risk of the image going out. Dust resistance and cooling performance are
greatly enhanced by the automated self-cleaning filter and heat-pipe cooling
system technologies that have proven so successful in air conditioners, en-
abling extended continuous use for monitoring and digital signage applications.
High Reliability
Durable and Reliable – Continuous 24/7 Use Capability
Powerful Large-screen Images in
Well-lit Halls/Auditoriums
Cutting-edge Technologies Reproduce Strikingly Sharp Images
Estimation of resolution compensation data
Image processed by Super Resolution
Enlarged image (original)
Compensation
Low-resolution image
High resolution data that does not
exist in the enlarged image is
estimated by Mitsubishi’s proprietary
image processing algorithm.
Enlargement
High Image Quality
Edge blending function Image overlap apparent
With
edge blending
Without
edge blending
Lamp life specification is an estimate based on verification under proper conditions and is not the duration of
the warranty. Lamp will shut-off automatically when usage reaches the specified estimated maximum lamp
hours. Service life may vary widely depending on usage and operating environment and conditions, as well as
users’ adherence to the maintenance and cleaning procedures provided in the user manual.
Dual lamp and
lamp relay function
Automatic cleaning
filter
Heat-pipe cooling
system
24 hours a day, 7 days a week
Anxiety-free continuous operation
High Brightness
The UD8350U Series, delivers a super bright 6500
lumen images, brightness level for presenting in
large meeting rooms and conference halls.
6500lm High Brightness
The UD8350U Series is equipped
with Mitsubishi Electric’s industry-
leading, advanced image-process-
ing algorithm, which is also used
in our televisions and displays. The
technology analyzes blurred com-
ponents in the original images, es-
timates high-resolution data not
provided in the original signal and
corrects the image quality. The re-
sult is the projection of sharp, vivid
images such as people’s faces in
fine detail.
Super Resolution
Various Lamp Relay Options
L
am
p
Li
f
e
C
om
p
ariso
n
3,000-hour
lamp
4,000-hour
lamp
4,000 hours
6
,000 hour
s
8,000 hours2,000 hours
First lamp replacement
Second lamp
replacement
Factory-installed lamp First lamp replacement
Lower
running
costs
Lower
running
costs
Factory-installed lamp
Fan noise during projector operation can be distracting
during a presentation
or videoconference. The UD8350U Series
operates at a significantly low noise
level of only 28dB (i.e., using
a single lamp in “low lamp”
mode). As a result, presen-
tations and conferences can
be held without distracting
projector noise in the back-
ground.
Ultra Quiet 28dB Operation
Examples of Noise Levels
20dB : Rustling leaves, the ticking of
a wall clock (from 1m in front)
30dB : A whisper, a suburban
area very late at night
40dB : A quiet neighborhood,
small birds chirping
28dB
Keystone Correction
Trapezoidal distortion caused when the projector is not positioned directly in
front of the screen is corrected in both vertical and horizontal directions.
Cornerstone Correction
Pixel conversion is used to correct
trapezoidal and diagonal distortion that
causes oblique images, ensuring the
proper aspect ratio.
Geometric Corrections
Curved-surface Projection Correction
Projectors in the series are equipped with a distor-
tion correction function that can be used when pro-
jecting images onto curved surfaces. Coordinates
at the image’s four corners are adjusted, enabling
the projection angle to be adjusted at the time of
angled or stacked projection. It is extremely handy
for unique applications like projecting images onto
special surfaces such as pillars at event sites.
Multiple projectors side-by-side
Multiple projectors top-bottom
Optional
The trademark of PJLink is trademark applied for
registration or registered trademark in Japan, the
United States, and other countries and areas.
Projectors come equipped with a color wheel that accentuates brightness,
and an optional color wheel for accentuating color is available. A sensor-based
detection function is embedded in each unit to detect when a color wheel is
replaced, at which time the color wheel index is automatically adjusted. This
interchangeability enables a more appropriate expression of the images being
reproduced.
Interchangeable Color Wheels
Projectors are equipped with a RJ-45 LAN terminal for remote operation.
Additionally, when used with Crestron RoomView
TM
, integrated control of up
to 250 projectors including power on/off control, message display and confir-
mation of lamp service hours is possible. The UD8350U Series is equipped
with AMX Device Discovery for
simplified device management and
compatible with PJLink
TM
.
Network Connectivity
Images can be projected over a full 360° range along
the vertical axis* including reproduction on the ceiling
or floor. The application possibilities are limitless.
*Excluding use in high-altitude mode.
360° Projection Capability
Multiple terminals
ID-compatible remote control
Power zoom/Focus and lens shift
Stand-by wattage under 0.3W
1
Mechanical shutter
Lamp side access
OSD menu multilanguage compatibility (19 languages
2
)
2-Screen mode
Direct power off
Test pattern
High-altitude mode (2,000 to 2,700m)
Closed caption support
1 When in stand-by (low) mode. At this time, use of the LAN function, serial output and
Remote 1 is not possible.
2 Previous languages: Chinese, English, French, German, Italian, Japanese, Korean, Polish,
Portuguese, Russian, Spanish, Swedish
Languages added: Dutch, Indonesian, Malaysian, Norwegian, Thai, Turkish, Vietnamese
For the UD8350U Series, we've utilized the same mechanism (mesh filter and
cleaning brush) that has a proven track record in Mitsubishi Electric air condi-
tioners and air purifiers is utilized.
It automatically prevents dust from building up in
the radiator of the heat-pipe cooling unit for the digi-
tal micromirror device (DMD), thereby ensuring
trouble-free use for extended periods of time.
Continuous, bright projection is ensured through the utilization of a dual-lamp
light source and a variety of setting options. When two lamps are in use, one
of the lamps can be rested (turned off) once a day or week. Additionally, if
only one lamp is being used and it goes out, an automatic back-up function
activates the other lamp, enabling nonstop projection.
Automatic Cleaning Filter
Compared to liquid-based cooling systems, this heat-pipe cooling system has
a simplified structure and does not require a power supply, enabling a more
compact design and cost reductions. Not only is it highly reliable, other ben-
efits include exceptional energy savings, quiet operation and elimination of
concerns regarding liquid leaking.
Heat-pipe Cooling System
Designed with a lamp temperature controlling system,
the UD8350U Series can support an estimated lamp
rating of up to 4000 hours. The long estimated lamp life
makes dramatic reductions in overall cost of ownership
by decreasing the frequency of lamp replacements.
Long 4000hrs Lamp Life
Imagine a long presentation or seminar in a large, bright room like a hall
or auditorium. The impact of that presentation will depend on the perfor-
mance of the projector you use. To ensure that nothing goes wrong, the
UD8350U Series is equipped with digital light processing (DLP
TM
) technol-
ogy that reproduces high-definition images in high contrast and with supe-
rior brightness. Built for durability and easy installation and maintenance,
they last and last with minimal upkeep. The UD8350U Series is equipped
with dual lamps, allowing the continuous projection of images for long
periods of time together with greatly increased reliability. For installation
models, our aim was to ensure the advanced level of performance essen-
tial for such units.
For board room, conference hall
For Digital Signage
Brilliant Support for Various Presentation Venues
including business, education and entertainment
screen
UD8350U
/
UD8350LU
UD8350U
(
BL
)