Filter
Top Products
Edge blending function
With
edge blending
3 4
For board room, conference hall
For Auditorium
For Digital Signage
screen
Ample Features for Increased Expressiveness and Operation Ease
Color matching function
Multiple projectors side-by-side Multiple projectors top-bottom
Examples of Noise Levels
20dB : Rustling leaves, the ticking of
a wall clock (from 1m in front)
30dB : A whisper, a suburban
area very late at night
40dB : A quiet neighborhood,
small birds chirping
28dB
●
OSD menu multilanguage compatibility
(19 languages*)
●
2-Screen mode
PinP: XD8100U Split: WD8200U
XD8000U UD8400U
●
Direct power off
●
Test pattern
●
High-altitude mode (2,000 to 2,700m)
●
Closed caption support
(
(
Optional
*Previous languages: Chinese, English, French, German, Italian,
Japanese, Korean, Polish, Portuguese, Russian,
Spanish, Swedish
Languages added: Dutch, Indonesian, Malaysian, Norwegian, Thai,
Turkish, Vietnamese
The trademark of PJLink is trademark applied for registration or registered
trademark in Japan, the United States, and other countries and areas.
Fan noise during projector operation can be distracting
during a presentation or videoconference. XD8100U Series
projectors operate at a significantly low noise level of only
28dB (i.e., using a single lamp in “low lamp” mode). As a
result, presentations and conferences can be held without
distracting projector noise in the background.
Ultra Quiet 28dB Operation
Projectors come equipped with a color wheel that accentu-
ates brightness, and an optional color wheel for accentuat-
ing color is available. A sensor-based detection function is
embedded in each unit to detect when a color wheel is re-
placed, at which time the color wheel index is automatically
adjusted. This interchangeability enables a more appropriate
expression of the images being reproduced.
Interchangeable Color Wheels
ID settings for up to 63 projectors are possible. Setting the
IDs allows control of each individual projector when mul-
tiple projectors are installed.
ID-compatible Remote Control
The zoom/focus and lens shift adjustment are powered by
an electric motor, ensuring easy operation.
Power Zoom/Focus and Lens Shift
*When in stand-by (low) mode. At this time, use of the LAN function,
serial output and Remote 1 is not possible.
Stand-by (low) mode power consumption is less than 0.3W,
offering increased energy savings and further contributing
to environmental preservation.
Stand-by Wattage under 0.3W*
An internal shutter in the projector enables light to be com-
pletely blocked when the projector is in Mute mode.
Mechanical Shutter
The lamps can be accessed from the side of the unit.
Lamp Side Access
Projectors are equipped with a RJ-45 LAN terminal for
remote operation. Additionally, when used with Crestron
RoomView
TM
, integrated control of up to 250 projectors in-
cluding power on/off control, message display and confir-
mation of lamp service hours is possible. XD8100U Series
are equipped with AMX Device
Discovery for simplified device
management and compatible
with PJLink
TM
.
Network Connectivity
Many different interfaces are possible thanks to a variety of
terminals including 3G-SDI (UD8400U only), DVI-D (HDCP),
HDMI and 5BNC. A control terminal (compatible with RS-
232C) is also provided for easier system integration.
Multiple Terminals
Images can be projected over a full
360° range along the vertical axis* in-
cluding reproduction on the ceiling or
floor. The application possibilities are
limitless.
*Excluding use in high-altitude mode.
360° Projection Capability
■ Keystone Correction
Trapezoidal distortion caused when the projector is not posi-
tioned directly in front of the screen is corrected in both
vertical and horizontal directions.
■ Cornerstone Correction
Pixel conversion is used to correct trapezoidal and diagonal
distortion that causes oblique images, ensuring the proper
aspect ratio.
■ Curved-surface Projection Correction
Projectors in the series are equipped with a distortion cor-
rection function that can be used when projecting images
onto curved surfaces. Coordinates at the image’s four cor-
ners are adjusted, enabling the
projection angle to be adjusted at
the time of angled or stacked pro-
jection. It is extremely handy for
unique applications like projecting
images onto special surfaces such
as pillars at event sites.
Geometric Corrections
■ Edge Blending
Edge blending creates a seamless image by adjusting the
brightness at adjoining edges when using multiple projec-
tors side-by-side to reproduce single widescreen images.
This feature can also be utilized for top-bottom projection or
a combination of side-by-side and top-bottom images; for
example, when images are projected from four projectors in
a two-by-two arrangement.
■ Color Matching
The use of multiple projectors to create a larger image can
result in color variations due to slight differences in projector
image processing. XD8100U Series projectors are equipped
with a color matching function that resolves this problem.
Each projector is adjusted so that the same colors are repro-
duced when multiple projectors are used simultaneously.
Multi-screen Solutions
Image overlap apparent
Without
edge blending
✽
Excluding XD8000U
✽
Excluding XD8000U
(UD8400U)