Filter
Top Products
screen
Brilliant Support for Various Presentation Venues
including business, education and entertainment
Imagine a long presentation or seminar in a large, bright room like a hall or auditorium. The impact of that presentation will depend on the performance of
the projector you use. To ensure that nothing goes wrong, these projectors are equipped with digital light processing (DLP
TM
) technology that reproduces
high-definition images in high contrast and with superior brightness. Built for durability and easy installation and maintenance, they last and last with
minimal upkeep. Both models are equipped with dual lamps, allowing the continuous projection of images for long periods of time together with greatly
increased reliability. For installation models, our aim was to ensure the advanced level of performance essential for such units.
7000lm High Brightness*
The XD8100U, delivers a super
bright 7000 lumen*
images, brightness level for presenting in large
meeting rooms and conference halls.
*WD8200U maximum is 6500 lumens.
360° Projection Capability
Images can be projected over a full 360° range
along the vertical axis* including reproduction on
the ceiling or floor.The application possibilities are
limitless. *Excluding use in high-altitude mode.
Ample Features for Increased Expressiveness and Operation Ease
Ultra Quiet 28dBA Operation
Fan noise during projector operation can be distracting during a presentation
or videoconference. The XD8100U and WD8200U projectors operate at
a significantly low noise level of
only 28dBA (i.e., using a single
lamp in “low lamp” mode).
As a result, presentations and
conferences can be held
without distracting projector
noise in the background.
Color matching function
Color Matching
The color matching function corrects
variations in the color reproduced by
each projector when multiple
projectors are used simultaneously.
This color homogenization enables
the integrated display of images.
The dual lamp system and lamp relay function enable continuous operation
with no risk of the image going out. Dust resistance and cooling
performance are greatly enhanced by the automated self-cleaning filter and
heat-pipe cooling system technologies that have proven so successful in air
conditioners, enabling extended continuous use for monitoring and digital
signage applications.
High Reliability
Durable and Reliable – Continuous 24/7 Use Capability
Powerful Large-screen Images in
Well-lit Halls/Auditoriums
Super Resolution
This innovative advanced image
processing algorithm is a product
of Mitsubishi Electric.
The technology analyzes blurred
components of the original images,
estimates the high-resolution data
not provided in the original signal
and corrects the image quality.
The result is the clear projection of
images such as people's faces in
fine detail.
Cutting-Edge Technologies Reproduce Strikingly Sharp Images
Estimation of resolution compensation data
Image processed by Super Resolution
Enlarged image (original)
Compensation
Low-resolution image
High resolution data that does not
exist in the enlarged image is
estimated by Mitsubishi’s proprietary
image processing algorithm.
Enlargement
High Image Quality
Modern Design
A stylish white-toned projector shell was chosen in
consideration of use as a ceiling-mounted installation.
Additionally, the detachable terminal cover hides projector
cabling, showing the ingenuity incorporated to ensure
an appealing unit that matches most interior spaces.
Terminai Cover
Natural Color Matrix (NCM)
In addition to conventional red (R), green (G) and blue (B) color gradations,
the intermediate colors of yellow (Y), magenta (M) and cyan (C) can each be
controlled independently. Accentuating specified colors according to need
realizes the reproduction of vivid color tones one step closer to natural.
Curved Surface Projection Correction
These projectors are equipped with a function for correcting distortion that
occurs when projecting images onto curved surfaces. This advanced feature
is practical for unique applications such as projecting images onto pillars at
special event sites.
Multi-Screen Solution
Edge Blending
Edge blending creates a seamless
image by adjusting the brightness at
adjoining edges when using multiple
projectors side-by-side to reproduce
single widescreen images.
Edge blending function Image overlap apparent
With edge blending Without edge blending
Multiple projectors side-by-side
Control Projector from Remote Locations
Control operations remotely up to 30m from the projector when using
the wireless remote controller (must be standing in front of the projector).
When using the wired remote controller, projector operation is possible at a
distance of up to 100m.* These options give the presenter the ability to move
more freely at big venues, such as a large meeting rooms or auditoriums.
ID-compatible Remote Control
ID settings for up to 63 projectors are possible. Setting the IDs allows
control of each individual projector when multiple projectors are installed.
Remote Control to Match the Installation
Examples of Noise Levels
20dBA : Rustling leaves, the ticking of
a wall clock (from 1m in front)
30dBA : A whisper, a suburban
area very late at night
40dBA : A quiet neighborhood,
small birds chirping
28dBA
Long 4000hrs Lamp Life
Designed with a lamp temperature controlling
system, the XD8100U and WD8200U can
support an estimated lamp rating of up to
4000 hours. The long estimated lamp life
makes dramatic reductions in overall cost of
ownership by decreasing the frequency of
lamp replacements.
Lamp life specification is an estimate based on verification under proper conditions and is not the duration of
the warranty. Lamp will shut-off automatically when usage reaches the specified estimated maximum lamp
hours. Service life may vary widely depending on usage and operating environment and conditions, as well as
users' adherence to the maintenance and cleaning procedures provided in the user manual.
L
amp Li
f
e Comparison
3,000-hour
lamp
4,000-hour
lamp
4,
000
h
our
s
6
,
000
h
ours
8,
000
h
ours3
,
000
h
our
s
Factory-installed lamp First lamp replacement
Secound lamp
replacement
Factory-installed lamp First lamp replacement
Lower
running
costs
Lower
running
costs
For board room, conference hall
For Auditorium
For Digital Signage
Various Lamp Relay
A dual lamp light source offers numerous advantages. Key benefits include
the fact that the lamps can be rested (turned off) alternately during long-term
usage, ensuring continuous projection. Additionally, if one of the lamps goes
out, there is an automatic back-up function that activates the other lamp,
enabling nonstop projection with no interruption.
Motorized lens shift
2-Screen mode
(PinP : XD8100U / Split : WD8200U)
Test pattern
Mechanical shutter
Direct power off
Lamp side replacement
Closed caption support
High-altitude mode
(2,000 to 2,700 m)
OSD menu multilanguage
compatibility (19 languages*)
Stand-by Wattage under 0.3W*
Stand-by (low) mode power consumption is less than 0.3W, offering increased
energy savings and further contributing to environmental preservation.
Heat-pipe Cooling System
Compared to liquid-cooling systems, the heat-pipe cooling system has
a simpler structure and does not require a power supply, enabling cost
reductions and a compact design. Not only is it highly reliable, other benefits
include exceptional energy savings and quietness as well.
Automatic Cleaning Filter
For the XD8100U and WD8200U, we've utilized the
same mechanism (mesh filter and cleaning brush) that
has a proven track record in Mitsubishi Electric air
conditioners and air purifiers is utilized.
It automatically prevents dust from building up in
the radiator of the heat-pipe cooling unit for the digital
micromirror device (DMD), thereby ensuring
trouble-free use for extended periods of time.
Keystone Correction
Trapezoidal distortion caused when the projector is not positioned directly in
front of the screen is corrected in both vertical and horizontal directions.
Cornerstone Correction
Pixel conversion is used to correct
trapezoidal and diagonal distortion that
causes oblique images, ensuring the proper
aspect ratio.
Geometric Corrections
Dual lamp and
lamp relay function
Automatic
Cleaning Filter
Heat-pipe cooling
system
24 hours a day, 7 days a week
Anxiety-free continuous operation
Interchangeable Color Wheel
Choose between two color wheels, one each accentuating color and the other
emphasizing brightness, depending on the type of images to be projected.
This interchangeability enables a more appropriate expression of the images
being reproduced.
Optional
*Previous languages: Chinese, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish
Languages added: Dutch, Indonesian, Malaysian, Norwegian, Thai, Turkish, Vietnamese
*Depends on cable performance.
*When in stand-by (low) mode. At this time, use of the LAN function, RS-232C output and Remote 1 is not possible.
Network Connectivity
Projectors are equipped with a RJ-45 LAN terminal for remote operation.
Additionally, when used with Crestron
®
Room View
®
, integrated control of up
to 250 projectors including power on/off control, message display and
confirmation of lamp service hours is possible using RoomView™/e-Control™.
Both projectors are equipped with
AMX Device Discovery for
simplified device management and
compatible with PJLink™.
High Brightness
The trademark of PJLink is trademark applied for registration or registered
trademark in Japan, the United States, and other countries and areas.