Mitsubishi Electronics XL6500LU Projector User Manual


 
EN-18
Connecting to video equipment having a HDMI terminal or DVI-D terminal
You can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal of
this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this projector supports
HDCP and is able to receive encrypted digital video data that are output from DVD players.
HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital
video data for the purpose of copy protection.
HDMI (High-Defi nition Multimedia Interface) is fully backward compatible with computers, displays and consumer
electronics devices incorporating the DVI standards.
This projector can be linked with video devices equipped with HDMI output terminal or DVI-D output terminal.
However, with some of them, this projector may not display any image or not operate correctly.
If this projector doesn’t display any image or not operate correctly, see the operation manual of the video device
for its connection.
Use of a long cable may decrease the quality of projected images.
Connection (for video equipment having an HDMI terminal)
Use a commercially available DVI-HDMI conversion cable.
Some cables may not be connected correctly depending on the size and shape of their connectors.
Use AUDIO IN 1 terminal for audio input.
Equipment having an
HDMI terminal
To HDMI terminal
COMPUTER/COMPONENT
VIDEO DVI-D (HDCP)
To audio input
terminals
To audio output
terminals
Audio cable (option)
DVI-HDMI conversion cable (option)
Viewing video images (continued)
CB(PB)Y CR(PR)
B G R
AUDIO IN 1
BNC cable (option)
DVD player or HDTV decoder
BNC-RCA connector (option)
COMPUTER/COMPONENT
VIDEO IN 1
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fi tting (Y, CB, CR). When connecting such DVD player with this
projector, use the COMPUTER/COMPONENT VIDEO
IN 1 terminals.
The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
The terminal’s names vary depending on the connected devices.
Use BNC cables for connection.
Image may not be projected correctly with some DVD players.
If colors aren’t displayed correctly when the projector is connected to a high-defi nition video device having R, G,
and B output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.
Audio cable (option)
To audio output terminals