Filter
Top Products
EN-13
5
The password input screen appears. Enter the
password you set.
• The default password is admin.
(Note)
If you input a wrong password three successive
times, the Web browser is closed. In this case, repeat
from step 1.
6
The ProjectorView main screen appears. Click any-
where on the screen.
• The screen may not show the latest information
unless you click on the screen.
• Some buttons may not be displayed. In this case,
select [Start] - [Control Panel] - [Java Plug-in] and
disable the cache.
ProjectorView (continued)
Press to display the Setup win-
dow. (See page 15.)
Press to control the projector. For
the functions of these buttons,
see the user guide of the projec-
tor.
Failures in the projector are indicated with dots. When you place the mouse cursor to a dot,
the indicated failure is described in the box at the bottom.
(Note)
When mute is on, you cannot change the lamp mode. If you try to change the lamp mode, a
dot appears next to “Command error” of WARNINGS.
[ProjectorView main screen]
Projector information is dis-
played. To display the projector
information, set LAN-Controlled
Mode to ON (1) (see page 10)
and enter necessary information
on the Projector Setup screen
(see page 15) in advance.