Filter
Top Products
NP644 IEEE 802.11g Wireless Network USB Adaptor 21
YML787 Rev1
Advanced
In the Advanced page you can configure advanced settings of your 108Mbps Wireless
Network USB Adaptor
Field Description
Encryption: There are four options available: Disable (WEP), Enable
(WEP), WPA and WPA-PSK. The default setting is set to
“Disable”. Enable and Disable refer to WEP data encryption
feature. If Enable is selected, you will be required to select the
Authentication mode from the drop down list. If WPA is selected,
configuration is enabled. Select the “configuration” button.
You will then be prompted with the following pop up window.