Filter
Top Products
Specifications
Printing Method: Thermal Direct
Dots Per Line: 576 (203 dpi)
Printing Width: 70mm
Resolution: 8 dots/mm
Printing Speed: Up to 2 ips
Head Temperature Detection: By thermistor, hardware protection
against overheating
Paper-Out/TOF Detection: By photo interruptor
Current Consumption: 3.8A at 64 dots
Standard Operating Features
Character Set: ASCII International, IBM Graphic, and 1
downloadable set
Graphic Print: Bit addressable graphic command set: Bar
codes 39, 128, 2 of 5, UPC, Graphic logo
store and print
Supervised Operation: Supervisory command set to read battery
voltage, buffer status, power management
and data transfer
Line Buffering: 32k standard
Print Contrast: Auto and user selectable
Print Output: Double high, double wide and bold print
Communication
Interface: Standard - Serial RS-232 with modular
connector (6 pin), Infra-Red (IrDA) up to
38.4K transmission speed with ambient
light filter or Bluetooth. Optional – Magnetic
Card Reader (3 track, simultaneous read);
Smart Card Reader
Baud Rate: 2400, 4800, 9600, 19,200, 38,400 baud,
dip switch set
Fast IrDA Transfer Speed: Up to 38.4K depending on computer
compatibility
Std. IrDA Transfer Speed: 9600 connect and transfer
Handshaking: CTS/RTS and or XON/XOFF; MS-DOS and
Windows compatible with full-speed
handshake; Windows 95
®
,
98
®
, Xp and
2000 printer drivers; Windows CE print
application; Windows CE and Pocket CE
print driver from fieldsoftware.com;Palm
O/S print driver from Bachmann Software
or stevenscreek.com
Power
Power: Internal rechargeable battery and wall
mount DC power pack
Battery: 5 cell NiMH 1500 mAH rechargeable
DC Power Pack: 9vdc/1.4A
Battery Recharge: Internal 90 minute fast charge with
auto switch to trickle charge; Over
current and overheat protection
Power ON/OFF: Via switch or by raising RTS (ON) or
lowering RTS (OFF); Auto power
switch down timer
User Interface
Status Indicators: 3 LEDs
User Switches: 2 membrane switches Power ON/
OFF, Feed
Connection: Modular (6 pin) for Data I/O; DC input
Power Jack for wall mount adapter;
Infra- Red (IrDA) with Ambient Light
Filter, or Bluetooth.
Mechanical
Dimensions: 121x152x57mm (4.75x6x2.5”) WxLxH
Weight: 580g (20oz) with paper and battery
pack
Warranty: 1 year printer; 6 months or 1 million
inches on printhead; batteries, 90
days
Environmental Specifications
Operating
Temperature: -10° to 50°C
Storage
Temperature: -20° to 60°C
Humidity: Up to 85% RH (noncondensing)
Drop Test: 4 feet
Agency Approvals: FCC Part 15J Part B; CE
EN55022 Part B, EN50082-1
Specifications subject to change without notice
Print Media
Paper Width: 80mm (3.125”)
Lines of Print/Roll: 4400 (1.4" diameter roll, 0.4" core,
approx. 45 feet long
Paper Rolls Per
Charge: ~6
Paxar Americas, Inc.
170 Monarch Lane
Miamisburg, OH 45342
800.543.6650 prompt 5
937.865.2554 fax
e-mail: dmail@paxar.com
www.paxar.com
©2004 Paxar Americas, Inc.
All Rights Reserved
MON-BR-0029