Filter
Top Products
©2008 Avery Dennison Corporation. All rights reserved. Printed in U.S.A. D-0808
Avery Dennison Printer Systems Division
170 Monarch Lane Miamisburg, OH 45342
1.800.543.6650 Monday-Friday, 8 AM–6:30 PM ET www.monarch.com
Features and Specs at a Glance
Encodes UHF Chips•
Prints Bar Code Data•
Prints Tags or Labels•
Thermal Direct or •
Transfer
Knife Option•
Prints up to 12 ips•
Optional 300 dpi Printing•
Dual Wired/Wireless •
Ethernet Available
Dimensions: Height – 13.0” (330 mm); Width
– 12.5” (318 mm); Depth – 17.3” (439 mm)
Weight – 29 lbs. (13.2 kg)
Printing Method: Thermal Direct and Thermal
Transfer
Printhead: 4.0” (102 mm/812 dots); 203 dots/inch
(8 dots/mm) OR 300 dots/inch (11.8 dots/mm.
Both printheads provide enhanced print quality
Operator Interface: 32-Bit 150 MHz Processor
RFID Protocols: EPC Gen 2 and EM 4122
Memory: 4MB Flash, 16 MB SDRAM Optional
16MB; Configurable 8 MB RAM using these
buffers: Transmit, Receive, Image, Format,
Downloadable & Scalable Fonts
Bar Code Types: UPCA +2/+5, UPCE +2/+5,
EAN8 +2/+5, EAN13 +2/+5, Interleaved 2
of 5, Extended Code 39, Codabar (NW7),
Code 128, Code 93, MSI, PDF417, Postnet,
MaxiCode, Code 16K, Quick Response (QR
Code); Aztec
Standard Fonts: Bitmap- Standard, Reduced,
Bold, OCRA-like, CG Triumvirate, and CG
Triumvirate Bold TrueType
®
- EFF Swiss Bold
Supports downloaded double-byte (TrueType
and bitmap) fonts, allowing for Chinese,
Japanese, and Korean character sets
Font Magnification: 1x to 7x 4 to 250 pt. for
scalable/TrueType fonts
Monarch
®
Service: Every Monarch printer is fully
supported by Monarch Service, the largest net-
work of experienced, full-time bar code and RFID
technicians in the industry.
Monarch
®
9855
®
RFMP
TM
Multi-Protocol RFID Printer/Encoder
Versatile RFID
The Monarch 9855RFMP printer/
encoder is compatible with a full
range of inlays to complement
your specific application,
including inlays from:
Avery Dennison•
Alien Technology•
KSW•
Raflatac•
RF Identics•
More!•
Monarch
®
Supplies: For smooth and reliable
performance, only Monarch supplies are
recommended for use with Monarch printers.
Our labels scan virtually 100% of the time,
cutting wasted rescanning and labeling time.
We won’t approve an inlay
until it meets Avery Dennison’s
exacting yield standards!
This versatile printer/encoder
also supports 1 inch feed
lengths and features full 1D and
2D bar code print capability on
RFID labels.
Compliant RFID
The Monarch 9855RFMP meets
OSHA requirements for use
in a workplace and is FCC
certified, RoHS compliant and
certified for use in over 40
countries. In addition, Avery
Dennison’s printer and supply
manufacturing processes are
ISO-9001 certified.
Connected
RFID
Our innovative Dual Wireless
802.11b/g/Wired Ethernet network
interface card option allows you
to run your printers on a wireless
network, with the ability to change to
a wired connection. Automatically
switch from wireless to the wired
ethernet port while retaining the
IP address and without losing the
session, enhancing your productivity.
XML-enabled
printers are currently
unavailable.