Monarch TC9840ENAD Network Card User Manual


  Open as PDF
of 4
 
3
3. Press Enter/Pause to select the internal port. After setting the port to
internal, change the MODE to enable bi-directional communications.
4. Press l or r until you see
PARALLEL COMM
l Mode
5. Press Enter/Pause. You will see
MODE
Compatible r
6. Press r to display the other option, IEEE1284 and press Enter/Pause.
This selects IEEE1284 for bi-directional Ethernet communications.
(Compatible mode is used with a computer connection and a parallel
cable.)
Configuring the Print Server
Software is available on Monarch's Web site (www.monarch.com) to
configure the print server or you can order part number TC9840ENCD for the
MonarchNet
Utilities compact disc. It can also be configured using HP Jet
Admin
or HP Web JetAdmin software.
A Technical Reference Manual, which includes additional Ethernet set-up
and configuration information, is also available on our Web site. You can
also order part number TC9800ENTR for a printed copy of the Technical
Reference Manual.
When turning on the printer or after sending a ^PR
(printer reset) immediate command, wait at least eight (8)
seconds before sending data to the print server. Any
data sent to the print server before the 8-second interval
may be lost.
 previous