Filter
Top Products
Before first use
Before using the toaster for the first time
operate the toaster without bread in a
ventilated room.
• The bread carriage levers ¤ will not stay
down unless the toaster is connected to
the mains supply.
• As with all new electric heating elements,
your toaster emits a ‘new’ smell when it
is first switched on which is quite normal.
Toasting
The 4-slice toaster has two sides with
controls repeated for each half. Each half
can be used together or independently.
1 Select the desired level of browning on
the browning control fl marked 1 to 9.
The setting required will vary according to
the moisture content and thickness of the
bread.
2 After selecting the desired level, place
your bread in the slots ⁄ and depress
the bread carriage lever downwards until
it locks.
3 After the set time has been reached the
bread will pop up automatically ready for
removal from the slots. The bread
carriage lever will have returned to its
upper position and the heating element
will have switched off.
• If the bread in your toaster becomes
jammed disconnect your toaster at the
socket, allow it to cool, then remove the
bread.
• When not in use, remove the plug from
the mains socket.
• Allow the toaster to cool fully before
putting away.
WARNING: Do not wrap the cable
around the main body of the appliance
during or after use.
Using the frozen button
To toast frozen bread do not adjust the
browning control from your normal preferred
setting, place the bread normally in the
bread slots, then depress the relevant bread
carriage lever and press the frozen button‹.
Using the re-heat button
If your toast has popped up and gone
cold, the toaster offers a re-heat facility. To
use, depress the relevant bread carriage
lever and press the re-heat button ›
immediately. The button will illuminate and
the toaster will operate for a short period re-
heating the bread.
Using the cancel button
If you wish to interrupt the toasting
process, press the cancel button fi.
Using the bun warmer
B
Place the bun warmer „ and clip it on
top of the toaster ensuring it is securely in
place.
Place the buns or other items onto the
bun warmer. Set the browning control(s) to
the bun warmer position ‡. Depress bread
carriage lever(s) until they hold down. Wait
for the toaster to switch off automatically or
press the cancel button to switch the toaster
off before removing the buns.
WARNING: Take care not to touch
the metal of the bun warmer as it will
be hot.
Do not put more than two buns on the
bun warmer at any one time.
4
B
44061 rev3 10/10/05 10:04 AM Page 4