Filter
Top Products
4-6
www.moxa.com e-mail: info@moxa.com
Secure Terminal Servers/Terminal Servers
Secure Terminal Server/Terminal Server
4
Most device servers support only standard baudrates. However, some
applications require special baudrates, such as 250 Kbps or 500 Kbps.
With NPort 6000 device servers, users can use any baudrate between
50 and 921.k Kbps. The NPort 6000 works flawlessly with all devices
that require special baudrates.
Interchangeable modules provide maximum Ethernet
expansion flexibility.
RJ45 Ethernet Port
1 Fiber Ethernet Port
single mode/multi-mode
2 Fiber Ethernet Port
single mode/multi-mode
1 DB25 Printer Port
Although more and more devices are now Ethernet-ready, many legacy
devices only provide a serial interface. The main purpose of device
servers is to connect serial devices to Ethernet, allowing engineers to
integrate all devices into an Ethernet environment.
A problem can arise if both Ethernet-ready and legacy serial devices
need to be connected from the same location. The NPort 6450 and
6650 can use the Ethernet expansion module to add additional
Ethernet ports, effectively allowing operation as a combination Ethernet
switch/device server. With Ethernet expansion modules for the NPort
6450 and 6650, users no longer need to invest in a more expensive
switch or hub to connect every device. Modules are available for
different Ethernet media, including copper Ethernet, multi-mode fiber,
and single-mode fiber. Ethernet expansion modules can also be used
to create a cascading topology where device servers are connected to
each other in a daisy chain.
Any Nonstandard Baudrate Between 50 to 921.6 Kbps
Ethernet Port Expansion (NPort 6450/6650 only)
For mission-critical applications, data collected from a serial device
must be safeguarded if the Ethernet connection is severed. The NPort
6000 provides exceptionally reliable data transmission by saving serial
data to an internal 64 KB port buffer if the Ethernet connection fails.
When the Ethernet is reconnected, data in the buffer is automatically
released and sent to the appropriate destination. For the NPort 6250,
6450, and 6650, this buffer can be expanded by installing an SD card.
Port Buffering that Preserves Data if Ethernet Fails
Interchangeable modules for Ethernet expansion
1 RJ45 Ethernet Port
1 fiber Ethernet port
(single or multi mode)
2 fiber Ethernet ports
(single or multi mode)
1 DB25 printer port
Interchangeable modules provide maximum Ethernet
expansion flexibility.
RJ45 Ethernet Port
1 Fiber Ethernet Port
single mode/multi-mode
2 Fiber Ethernet Port
single mode/multi-mode
1 DB25 Printer Port
Interchangeable modules provide maximum Ethernet
expansion flexibility.
RJ45 Ethernet Port
1 Fiber Ethernet Port
single mode/multi-mode
2 Fiber Ethernet Port
single mode/multi-mode
1 DB25 Printer Port
Interchangeable modules provide maximum Ethernet
expansion flexibility.
RJ45 Ethernet Port
1 Fiber Ethernet Port
single mode/multi-mode
2 Fiber Ethernet Port
single mode/multi-mode
1 DB25 Printer Port
Interchangeable modules provide maximum Ethernet
expansion flexibility.
RJ45 Ethernet Port
1 Fiber Ethernet Port
single mode/multi-mode
2 Fiber Ethernet Port
single mode/multi-mode
1 DB25 Printer Port
IP Systèmes, importateur/distributeur des solutions de communication industrielle MOXA en France Tel : 0820 200 290 (15cts/min)