Moxa Technologies EDS-208 Switch User Manual


 
- 5 -
Mounting Dimensions (unit = mm)
40.03
Front View
EDS-208 EDS-208-M-SC/ST
Side View Rear View Top View
74
40.03
86.5
74
15
15
7
32
100
100
23
15.6
10.5
12
76.2
7
5
3
1
100
10
P
8
6
4
2
5
3
1
100
10
P
8
6
4
2
7
Tx
Rx
100M
24 VDC/VAC
V+
V-
DIN-Rail Mounting
The plastic DIN-Rail attachment plate should already be fixed to the rear panel
of EDS-208 when you take it out of the box. If you need to reattach the
DIN-Rail attachment plate to EDS-208, make sure the DIN-Rail kit is situated
towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into
the slot.
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
DIN-Rail
DIN-Rail
DIN-Rail
To remove Moxa EDS-208 from the
DIN-Rail, insert a flat-blade screw driver
horizontally into the DIN-Rail kit under
the EDS-208, and then pull it upwards
and release EDS-208 towards you away
from the DIN-Rail.