Moxa Technologies IA260 Laptop User Manual


 
2
www.moxa.com
info@moxa.com
4
Moxa Embedded Computers
DIN-Rail
IA260 Series
Cirrus Logic EP9315 ARM9 CPU, 200 MHz
128 MB RAM on-board, 32 MB flash disk
4 software-selectable RS-232/422/485 serial ports
VGA interface for field site monitoring
Dual 10/100 Mbps Ethernet for network redundancy
8+8 DI/DO channels, up to 30 VDC
12 to 48 VDC power input design
Supports CompactFlash and USB 2.0 hosts
Ready-to-run WinCE 6.0 platform
H-type heat dissipation design for system reliability
-40 to 75°C wide operating temperature model available
RISC-based computers with 4 serial ports, dual LANs, VGA, DIO,
CompactFlash, USB
Overview
The IA260 embedded computers come with 4 RS-232/422/485 serial
ports, dual Ethernet ports, 8 digital input channels, 8 digital output
channels, a VGA output, 2 USB hosts, and a CompactFlash socket.
The computers are housed in a compact, IP40 protected, industrial-
strength aluminum case.
The IA260 computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200
MHz RISC CPU. This powerful computing engine supports several
useful communication functions, but will not generate too much heat.
The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you
enough memory to run your application software directly on the IA260.
The patented “H-Type” heat dissipation design makes the IA260 an
ideal computing unit for applications in extremely hot field sites, since
it can directly transmit heat from inside the housing to the air.
Appearance
Front View Top View
LED Indicators
10/100 Mbps
Ethernet x 2
R T
4
CompactFlash
Socket
Power, Ready,
Storage
Serial, Tx/Rx
LED Indicators
VGA Output
RS-232/422/485
Serial Port x 4
USB 2.0 Host x 2
Serial, Tx/Rx
LED Indicators
DI x 8
DO x 8
Power Input
Reset
With its built-in VGA output interface, the IA260 computers are
suitable for use with SCADA systems in industrial applications, such
as factory automation, production line process monitoring, and mining
automation, that require VGA and HMI features.
The IA260 computers support RS-232/422/485, digital I/O, and have
dual LAN ports, making them ideal as communication platforms for
industrial applications that require network redundancy. In addition
to the standard model, a wide temperature (-40 to 75°C) model is
available for use in harsh industrial automation environments.
The IA260 runs WinCE 6.0 (pre-installed), providing a friendly
environment for developing sophisticated application software. The
great software support that Moxa provides makes the programmer’s
job easier and helps programmers develop bug-free code quickly and
at a lower cost.
The certification logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifications” below.