Filter
Top Products
3
info@moxa.com
www.moxa.com
4
Ready-to-run Platform Provider for Industrial Embedded Computing
Hardware Specifications
Cirrus Logic EP9315
32-bit ARM9 200 MHz
128MB
RAM
32MB
Flash
Power
Circuit
RTC
Watchdog
LAN
MAC
PHY
Ethernet x 2
LAN
CF
Function
RS-232/422/485 x 4
LAN
Controller
PHY
VGA
USB 2.0
Host x 2
RS-232
UART
Console
Port
DIx8 DOx8
MOXA
UART
ASIC
MOXA
UART
ASIC
MOXA
UART
ASIC
MOXA
UART
ASIC
Serial
Port 1
Serial
Port 2
Serial
Port 3
Serial
Port 4
H/W Block Diagram
Computer
CPU: Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed): Windows CE 6.0
DRAM: 128 MB onboard (optional 256 MB)
Flash: 32 MB onboard (optional 64 MB)
Storage Expansion: CompactFlash socket
USB: USB hosts x 2, compliant with USB 2.0 (OHCI) type A
connectors
DI/DO: DI x 8, DO x 8, TTL
Reset Button: Supports “Reset to Factory Default”
LAN Interface
Ethernet: Auto-sensing 10/100 Mbps x 2, RJ45 connectors
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 4
Serial Standards: RS-232/422/485, software-selectable
Connectors: DB9 male
Console/Debugging Port: RS-232 (TxD, RxD, GND), 4-pin header
output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC™ (automatic data
direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 8, source type
Input Voltage: 0 to 30 VDC at 5 KHz
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: 10-pin screw terminal block (8 points, COM, GND)
Optical Isolation Protection: 3 KV
Digital Output
Output Channels: 8, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 9-pin screw terminal block
Optical Isolation Protection: 3 KV
Display
Graphics Controller: EP9315 internal graphics accelerator engine
with TTL graphical signal support
Display Memory: Dynamic video memory (shares system memory)
Graphics Resolution: 1024 x 768, 8 bits
Display Interface: CRT interface for VGA output, DB15 female
connector
LEDs
System: Power x 1, Ready x 1, Storage x 1
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 4, RxD x 4
Physical Characteristics
Housing: Aluminum, industrial vertical form factor
Weight: 1 kg
Dimensions: 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage: Redundant power input design, 12 to 48 VDC (3-pin
terminal block)
Power Consumption:
480 mA @ 12 VDC (with no load on USB ports)
900 mA @ 12 VDC (with load on 2 USB ports)
Regulatory Approvals
EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,
EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A), CCC
(GB9254, GB 17625.1)
Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), LVD
(EN60950-1), CCC (GB4943)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty