Filter
Top Products
3-29
BIOS Setup
MSI Reminds You...
Changing CPU Ratio/Vcore could result in the instability of the
system; therefore, it is NOT recommended to change the default
setting for long-term usage.
DDR Voltage (V)
Adjusting the DDR voltage can increase the DDR speed. Any changes made
to this setting may cause a stability issue, so changing the DDR voltage for
long-term purpose is NOT recommended.
Termination Vol (V)
The settings are used to adjust the termination voltage. Setting options:
Auto, 1.27, 1.29.
AGP Voltage (V)
AGP voltage is adjustable in the field, allowing you to increase the perfor-
mance of your AGP display card when overclocking, but the stability may be
affected. Setting options: Auto, 1.6, 1.7, 1.8.