Filter
Top Products
MultiVOIP User Guide Operation & Maintenance
339
After the Java program has been installed, you can access the
MultiVOIP using the web browser GUI. Close the MultiVOIP
Windows GUI. Start the web browser. Enter the IP address of the
MultiVOIP unit. Enter a password when prompted. (A password is
needed here only if password has been set for the local Windows GUI
or for the MultiVOIP’s FTP Server function. See “Setting a Password --
Web Browser GUI” earlier in this chapter.) The web browser GUI
offers essentially the same control over the voip as can be achieved
using the Windows GUI. As noted earlier, logging functions cannot be
handled via the web GUI. And, because network communications will
be slower than direct communications over a serial PC cable, command
execution will be somewhat slower over the web browser GUI than
with the Windows GUI.