Filter
Top Products
2
-
6
Table 2-1 (cont'd)
ISI Configuration and Installation Procedure
Step Procedure
6 Install the ISI card into the selected
expansion slot(s) in the same
manner as any other add-on
card, as instructed in your
computers documentation.
7 Fasten the retaining bracket to
the computer chassis and
replace the cover.
8 Connect the appropriate cable to
the ISI card. The ISI551PC has
one DB-9 connector. The DB-9 is
a DTE-type serial port suited for
the connection of Data Circuit-
terminating Equipment, or DCEs.
Note: Any cables connected to
the computer should be shielded
to reduce interference.
9 Turn power on to your computer.