Filter
Top Products
RouteFinder Quick Start Guide
12
In the ESSID box, enter the wireless ID. Wireless is the default ID. From the Channel
list, select a channel. 6 is the default channel. All workstations must have the same
ESSID Make sure that the channel is correct for your network.
Click Next.
9. The Select Function dialog box displays.
Select IP Routing (NAT Disabled)
to allow the RF802EW to function as a router
between the IP segment of the server and another IP segment. This option is ideal for
organizations needing to segment workgroups.
Select Enable PPPoE
to use the RF802EW with a time-base, rather than fixed-cost DSL
modem connection. Enter the User Name and Password provided by your ISP. This
option is most often used when connecting via DSL to the Internet.
Note: Enable PPPoE is valid only when IP Routing (NAT Enabled) is selected.
Click Next.