Filter
Top Products
Measurement Units
P = Pressure
PV = Pressure Special
*
TV=Temperature Special
**
T = Temperature
F = Fuel
AM = Ammeter
VM = Voltmeter
Base Model
EG21 = Gage
EGS21 = Swichgage
Range Scale
Show maximum value and units of measure (if other than
psi or °F) for Pressure, Temperature, Amps, and Volts
Bezel
Standard = Polished Stainless Steel
A = Black, Semi-Gloss Finish
B = SAE Low Profile Stainless
Battery Voltage
12 = 12 VDC systems
24 = 24 VDC systems
How to Order EG Senders
How to Order Accessories
and Replacement Parts
How to Order EG Series Gage and Swichgage Instruments
Sender Type
Blank = 1-wire
2 = 2-wire
D = 2-wire, dual
Range/Scale
Show maximum value and units of
measure (if other than psi or °F) for
Pressure, Temperature, Amps, Volts.
Thread Sizes
(for temperature senders)
X = 5/8-18 UNF
4)
1/8 = 1/8-27 NPT
5)
1/4 = 1/4-18 NPT
3/8 = 3/8-18 NPT
3/8B = 3/8-19 BSPT
1/2 = 1/2-14 NPT
5)
1/2B = 1/2-14 BSPT
5/8 = 5/8-18 UNF
3/4 = 3/4-14 NPT
7/8 = 7/8-9 UNC
M14 = 14 mmx1.5
M16 = 16 mmx1.5
M18 = 18 mmx1.5
M20 = 20 mmx1.5
M22 = 22 mmx1.5
M24 = 24 mmx1.5
Process to be Measured
P = Pressure
1)
PM = Pressure
2) & 3)
T = Temperature
F = Fuel
Off-Equipment Mounting Kit
This kit allows off-equipment mounting of the ESPM, ES2PM and
ESDPM pressure senders. Recommended for protection from damaging
vibration. Customer supplies hose and fittings. Specify part number
30-00-0213 when ordering.
Wire/Connector Assembly
Listed below are replacement part numbers for all wire/connector
assemblies. Voltage converter included for 24 and 32 volt. Specify part
number when ordering.
1)
Thru 100 psi (689 kPa) [6.89 bar].
2)
Ranges above 100 psi (689 kPa) [6.89 bar].
3)
Mounting off-equipment recommended.
4)
Straight threads, for use with adapter nut.
5)
Separate adapter nut not required.
NOTE: Boot is optional on ES2T
and ESDT temperature senders.
Specify p/n 00-00-3624.
Fuel level senders are for fuel tanks only.
Tank depths 6-24 in. (152-610 mm).
*Available only as EG21PV-80-12 or -24-A. This model is designed to read senders with
resistance curve of 9.5 to 182 ohms, which are commonly supplied as standard senders.
**Available only as EG21TV-300-12 or -24-A. This model is designed to read senders with
resistance curve of 240 to 18 ohms, which are commonly supplied as standard senders.
LOW VOLUME CONFIGURATIONS NOTE:
Low volume configurations may require minimum purchase quantities.
EGS21
P – 100 –12 – A
12 VDC 24 VDC
EG21P/T/F 05004506 05006166 (05004546)
EGS21P/T/F 05004507 05006168 (05004548)
EG21AM 05004505 05006170 (05004550)
EGS21AM 05004504 05006172 (05004552)
EG21VM 05004508 05004508
EGS21VM 05004504 05004504
ES 2 T – 250/300 – 1/4
CAUTION: Certain danger to human safety and to equipment may occur if some
equipment is stopped without pre-warning. It is recommended that monitored
functions be limited to alarm-only or alarm before shutdown.
IMPORTANT: EG21 Series gage and EGS21 Series Swichgage Movement and Illumination require 12 VDC to function.
For 24 volts systems, voltage converters are built into the electrical wire / connector assembly and supplied with the instrument.
Specify voltage when ordering. No designator is required for sta
ndard configurations.
CONTROL SYSTEMS & SERVICES DIVISION
P.O. Box 1819
Rosenberg, Texas 77471 USA
Phone: 281.633.4500 Fax: 281.633.4588
E-mail: sales@fwmurphy.com
Web site: www.fwmurphy.com
FRANK W. MURPHY, LTD
Church Rd Laverstock
Salisbury SP1 1QZ UK
Phone: +44 1722 410055 Fax: +44 1722 410088
E-mail: sales@fwmurphy.co.uk
Web site: www.fwmurphy.co.uk
COMPUTRONIC CONTROLS, LTD
41 - 43 Railway Terrace Nechells
Birmingham B7 5NG UK
Phone: +44 121 327 8500 Fax: +44 121 327 8501
E-mail: info@computroniccontrols.com
Web site: www.computroniccontrols.com
FW MURPHY INSTRUMENTS (HANGZHOU) CO. LTD
77 23rd Street
Hangzhou Economic & Technological Development Area
Hangzhou, Zhejiang, 310018, China
Phone: +86 571 8684 8886 Fax: +86 571 8684 8878
FW MURPHY
P.O. Box 470248
Tulsa, Oklahoma 74147 USA
+1.918.317.4100 Fax: +1.918.317.4266
E-mail: sales@fwmurphy.com
INDUSTRIAL PANEL DIVISION
Fax: 918.317.4124
E-mail: ipdsales@fwmurphy.com
MURPHY POWER IGNITION
Web site: www.murphy-pi.com
www.fwmurphy.com
Printed in U.S.A.