Filter
Top Products
Dimensions
6 in.
(152 mm)
10-3/4 in.
(273 mm)
8-3/4 in.
(222 mm)
15 in. (381 mm)
clearance for conduit
4-1/2 in.
(114 mm)
3 in.
(76 mm)
9 in.
(229 mm)
SIDE VIEW
TOP VIEW
3-1/2 in.
(89 mm)
3-3/4 in.
(95 mm)
3-1/2 in.
(89 mm)
4-3/8 in.
(111 mm)
4-5/8 in.
(117 mm)
3-3/4 in.
(95 mm)
BACK VIEW
SIDE VIEW
3-9/16 in.
(90 mm)
3-9/16 in.
(90 mm)
MOUNTING HOLE
6-3/4 in.
(171 mm)
clearance for plug
Mounting
Clamp
Model S1400SP
only
Series 1400 monitor (head)
Power Supply Box
Series 1400 System
The basic S1400 system consists of (1) the monitor, (2) a sensor input termi-
nal strip assembly (rail mount) (3) a 36 inch (914 mm) flat ribbon cable for
connecting the terminal strip to the monitor, (4) a power supply which
includes the control Inputs/Outputs and an intrinsically safe barrier, with
cable assembly. S1400SP; same as the S1400 system except the (1) monitor,
includes an extra connector (port) for connection to S14BCM92 relay board
expansion or for a digital output to interface with micro-controllers.
NOTE: Each unit is programmed to the customer specifications.
Accessories
S14RSA92 Adapter
:
Used to interface the S1400 opto-isolator input (also
called run input) to CD ignition systems. (Not approved by CSA.)
S14BCM92 Relay Board Expansion
:
Can either be used to expand the
S1400 relay capabilities an additional 7 relay control outputs, or for binary
representation of the alarm/shutdown terminal number(s) to a PC board.
(Not approved by CSA.)
LCDT-ISB Intrinsically safe barrier for N.O. sensors
:
Is designed to
accept non-intrinsically safe normally open inputs and convert them to
intrinsically safe outputs. Each LCDT-ISB provides for two (2) channels.
Warranty
A two-year limited warranty on materials and workmanship is given with this
Murphy product. Details are available on request and are packed with each unit.
How to Order
Specify model numbers below:
S1400: Complete system (see “Series 1400 System” section on left).
S1400SP: Complete system (with digital output for interface).
To order individual components and accessories specify the model number:
Specify Description
S1400H Monitor (head) only
S1400HSP Monitor (with digital output for interface) only
S1400TB32 Terminal block only
S1400CA36 Cable assembly only
S1400PS Power supply only
S14RSA92 CD ignition adapter for run signal input
S14BCM92 Relay board expansion w/cable and connectors
LCDT-ISB Intrinsically safe barrier for normally open sensors
Shipping Weights and Dimensions
Weight Dimension
S1400 28 Lb. (12.7 kg.) 20 x 14 x 12-
1
/2 in. (508 x 356 x 318 mm)
S1400H 2 Lb. (0.907 kg.) 6 x 6 x 6 in. (152 x 152 x 152 mm)
S1400HSP 2 Lb. (0.907 kg.) 6 x 6 x 6 in. (152 x 152 x 152 mm)
S1400TB32 2 Lb. (0.907 kg.) 12 x 7 x 4 in. (305 x 178 x 102 mm)
S1400CA36 2 Lb. (0.907 kg.) 6 x 6 x 6 in. ( 152 x 152 x 152 mm)
S1400PS 22 Lb. (9.98 kg.) 17 x 10 x 9-
3
/4 in. (431 x 254 x 248 mm)
S14RSA92 1 Lb. (0.453 kg.) 6 x 6 x 6 in. (152 x 152 x 152 mm)
S14BCM92 2 Lb. (0.907 kg.) 9-
3
/4 x 9 x 5-
1
/2 in. (248 x 229 x 140 mm)
LCDT-ISB 3 Lb. (1.3 kg.) 9 x 10 x 6 in. (229 x 254 x 152 mm)
Printed in U.S.A.
0889797
®
FRANK W.
MFR.
■ Frank W. Murphy Manufacturer
P.O. Box 470248; Tulsa, Oklahoma 74147; USA
tel. (918) 627-3550 fax (918) 664-6146
e-mail fwmurphy@ionet.net
■ Frank W. Murphy Southern Division
P.O. Box 1819; Rosenberg, Texas 77471; USA
tel. (281) 342-0297 fax (281) 341-6006
e-mail murphysd@intertex.net
Since 1939
■ Frank W. Murphy, Ltd.
Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
tel. +44 1722 410055 fax +44 1722 410088 tlx 477088
e-mail sales@fwmurphy.co.uk
■ Frank W. Murphy Pte., Ltd.
26 Siglap Drive; Republic of Singapore 456153
tel. +65 241-3166 fax +65 241-8382
e-mail fwmsales@fwmurphy.com.sg
■ Murphek Pty., Ltd.
1620 Hume Highway; Campbellfield, Vic 3061; Australia
tel. +61 3 9358-5555 fax +61 3 9358-5558
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
■ Murphy de México, S.A. de C.V.
Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
tel. +52-48-206264 fax +52-48-206336
e-mail murmexsl@infosel.net.mx
■ Murphy Switch of California
P.O. Box 900788; Palmdale, California 93590; USA
tel. (805) 272-4700 fax (805) 947-7570
e-mail sales@murphyswitch.com
■ Frank W. Murphy France
tel. +33 1 30 762626 fax +33 1 30 763989
DISCONTINUED