Murphy SM1 Network Card User Manual


 
INSTALLATION
Continued
4
Operation Sequence
1.
Make sure that the pump assembly is connected to a power source,
either 120 VAC or 230 VAC according to the pump model used.
2.
Depress the read button, located next to the gage(s) and hold until the
gage pointer stops traveling across the scale. See Fig. 6, at right.
3.
When pointer stops release the read button to allow pointer to settle.
4.
The value observed in the dial of the gage, is the level of the tank.
5.
Perform this operation as necessary for each tank to be checked.
Warranty
A two year limited warranty on materials and workmanship is provided with this Murphy product.
Details are available on request and are packed with each unit.
IMPORTANT:
Make sure SM Series system is completely
installed and operative. Check that all connections are air tight.
Service Parts and Accessories
UTKN2:
2 NPTM tank plug kit (includes 12 ft. [3.66 m] of stainless steel tubing/probe and fittings).
UTKN2LT:
2 NPTM tank plug less tubing (includes fittings).
UTKN4:
4 NPTM tank plug kit (includes 12 ft. [3.66 m] of stainless steel tubing/probe and fittings).
UTKN4LT:
4 NPTM tank plug less tubing (includes fittings).
UTKN4VR:
4 NPTM tank kit for vapor recovery (tubing and fittings included).
UTKN4VRLT:
4 NPTM tank plug for vapor recovery– less tubing (includes fittings).
SMPA:
Pump assembly for 120 VAC.
SMPA230:
Pump assembly for 230 VAC.
05090051:
Pressure SWICHGAGE
®
instrument with low and high pressure limit contacts, 15 psi scale.
CKBO:
Check Valve assembly–prevents product from backing up into gage.
85-01-0405:
1/2 NPTM x 1/4 NPTF reducing bushing–for CKBO valve mounting.
85-01-0402:
1/4 in. (6 mm) dia. 316 stainless steel tubing/ft. (probe).
85-01-0403:
1/4 in. (6 mm) dia. poly tubing/ft. (sensing line).
86-03-0405:
1/4 x 1/4 male hex nipple kit–for connecting tubing line to tank top.
85-03-0407:
1/4 x 1/4 male hex fitting kit–for connecting tubing or probe line to the tank top.
Read Button
SM Panel (SM2 Model Shown)
FEET
MURPHY
LEVELGAGE
FEET
MURPHY
LEVELGAGE
Pointer
Snap Ring
UNLEADED UNLEADED
Fig. 6
Printed in U.S.A.
®
FRANK W.
MFR.
Frank W. Murphy Manufacturer
P.O. Box 470248; Tulsa, Oklahoma 74147; USA
tel. (918) 627-3550 fax (918) 664-6146
e-mail fwmurphy@ionet.net
Frank W. Murphy Southern Division
P.O. Box 1819; Rosenberg, Texas 77471; USA
tel. (281) 342-0297 fax (281) 341-6006
e-mail murphysd@intertex.net
Since 1939
Frank W. Murphy, Ltd.
Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
tel. +44 1722 410055 fax +44 1722 410088 tlx 477088
e-mail sales@fwmurphy.co.uk
Frank W. Murphy Pte., Ltd.
26 Siglap Drive; Republic of Singapore 456153
tel. +65 241-3166 fax +65 241-8382
e-mail fwmsales@fwmurphy.com.sg
Murphek Pty., Ltd.
1620 Hume Highway; Campbellfield, Vic 3061; Australia
tel. +61 3 9358-5555 fax +61 3 9358-5558
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
Murphy de México, S.A. de C.V.
Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
tel. +52-48-206264 fax +52-48-206336
e-mail murmexsl@sanluis.podernet.com.mx
Murphy Switch of California
P.O. Box 900788; Palmdale, California 93590; USA
tel. (805) 272-4700 fax (805) 947-7570
e-mail sales@murphyswitch.com
Frank W. Murphy France
tel. +33 1 30 762626 fax +33 1 30 763989