Filter
Top Products
TDXM Module Dimensions
Front
5.50 in.
(140 mm)
0.156 in. (4 mm)
dia. 4 places
5.50 in. (140 mm)
Panel
Mounting
Hole
Keps Nut
Lock
washer
Screw
3-3/8 in. (86 mm)
minimum mounting
clearence.
NOTE: Ground stud connection
is only for single wire to
equipment ground. Do NOT
use for more than one wire.
49/64 in.
(19 mm)
5-1/4 in.
(133 mm)
TDXM
6.0 in.
(152.3 mm)
3.0 in.
(76 mm)
3.0 in.
(76 mm)
6.0 in. (152.3 mm)
Mounting Hole
SP
HISTORY
CHANNEL
SP1 - 3
TC TYPE/UNITS (SETUP 1)
0 = IGNORE
1 = TYPE J TC. DEG F
2 = TYPE K TC. DEG F
3 = TYPE J TC. DEG C
4 = TYPE K TC. DEG C
RTU/BAUD (SETUP 7)
BAUD SETUP
0 = 9600 (N, 8, 1)
1 = 19.2K (N, 8, 1)
2 = 38.4K (N, 8, 1)
3 = 9600 (N, 8, 2)
4 = 19.2K (N, 8, 2)
5 = 38.4K (N, 8, 2)
SETUP NUMBERS
0 = EXIT
1 = TC TYPE UNIT
2 = OFFSET
3 = SETPOINTS
4 = GRP/DEV A (SP1 OUT)
GRP/DEV B (SP2 OUT)
5 = CH SCAN DELAY
6 = CJ DISPLAY
7 = RTU/BAUD
8 = UNIT ID
CJ DISPLAY (SETUP 6)
0 = DISABLE
1 = ENABLE, DEG F
2 = ENABLE, DEG C
TDXM-DC
POWER INPUT: 10-32 VDC
OUTPUT TYPE AND RATING:
SP1: FET, OPEN DRAIN,
350 VDC, 0.5A MAX.
SP2: FET, OPEN DRAIN,
350 VDC, 0.5A MAX.
SP3: SSR, FORM C,
350 VDC/240 VAC, 0.12A MAX.
NON-INCENDIVE FIELD
WIRING CONNECTIONS
FOR USE IN CLASS I
DIV. 2, GROUPS C & D
LOCATIONS WHEN INSTALLED PER
MURPHY DRAWING 10-08-0006
THERMOCOUPLE INPUTS
(WHITE / YELLOW)
SCROLL
ENTER
6-1/2 in. (165 mm)
6-1/2 in.
(165 mm)
(SETUP) (SETUP)
C US
Head/Module
TDXM-DC
: 24-channel model, 10-32 VDC powered.
TDXM-DC W/SP3 Latch
: Same as TDXM-DC but
with SP3 latch feature.
Configuration Software
MConfig
: TDXM configuration software available.
Replacement Parts
Plug, kit, TDXM:
Terminal Plug replacement kit-P/N
10-00-7848.
Shipping Weights and Dimensions
Shipping Weight (all Models): 3 lb. (1.36 kg) approximately.
Shipping Dimensions (all Models): 5-1/2 x 9 x 9-1/2 in.
(140 x 229 x 241 mm) approximately.
Warranty
A limited warranty on materials and workmanship is given with this FW Murphy
product. A copy of the warranty may be viewed or printed by going to
www.fwmurphy.com/support/warranty.htm
Side
Back
How to Order Your TDXM
Specify the following part number:
For Outdoor Use, the TDXM should be mounted in a weatherproof enclosure
TDXM-00064B page 2 of 2
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. MURPHY, the Murphy logo are registered and/or common law trademarks
of Murphy Industries, Inc. This document, including textual matter and illustrations, is copyright protected by
Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy Industries, Inc.
www.fwmurphy.com
918.317.4100 Email: sales@fwmurphy.com