Filter
Top Products
15.The <Smoothing> cannot
be selected.
[ ] <Smoothing> is disabled when the screen is
displayed in the 1920 x 1200.
[ ] <Smoothing> is disabled when "Normal" is
selected in the <Screen Size> menu.
[ ] The image size is doubled both in
horizontally and vertically to (i.e. 1600 x
1200 enlarged from 800 x 600) provide clear
focus which does not require this function.
16.The Main menu of
ScreenManager does not
operate.
[ ] Check that there is nothing left on the face of
Enter switch. Wipe the control panel, and
then touch the Enter switch again with dry
finger.
If the problem persists, the adjustment lock is
probably on.
To unlock: switch the LCD
monitor off. Then, while touching the Auto
Adjustment switch, the power on.
17.The Auto adjustment
switch does not operate.
[ ] Check that there is nothing left on the face of
Auto Adjustment switch. Wipe the control
panel, and then touch the Auto Adjustment
switch again with dry finger.
If the problem persists, the adjustment lock is
probably on. To unlock: switch the LCD
monitor off. Then, while touching the Auto
adjustment switch, switch the power on.
[ ] The Auto sizing function is intended for use
on the Macintosh and on AT-compatible PC
running Windows.
It may not work properly in either of the
following cases.
When running an AT-compatible PC on MS-
DOS (Not windows). The background color
for the "wall paper" or "desktop" pattern is
set to black.
18.Frequency does not
change after installing
"Monitor information file"
in the attached utility disk
on Windows 98/Me/2000/
XP.
[ ] Use the graphics board's utility software to
change the input signal frequency.