Filter
Top Products
25
Chapter 3 Setting Monitor
Chapter 3 Setting Monitor
3-1. Enabling/Disabling Mode Selection [Mode Preset]
Allows you to select the specied modes only.
Use this function when all the display modes are not available or when keeping the display mode
unchanged.
Procedure
1. Choose <Tools> from the Adjustment menu, and press .
2. Choose <Mode Preset> from the <Tools> menu, and press .
3. Select the mode to change its settings with or , and press .
4. Select “On” or “Off” with or .
5. Press to exit the adjustment.
Attention
• You cannot set all the modes disable. Set at least one mode to “On”.
3-2. Locking Buttons [Key Lock]
This function allows you to lock to prevent changing the adjusted/set status.
Procedure
1. Press to turn off the monitor.
2. Press holding down for at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose <Key Lock> from the <Optional Settings> menu, and press
.
4. Select “Off”, “Menu”, or “All” with or , and press .
Settings Buttons that can be locked
Off (Initial settings) None (All buttons are enabled)
Menu
button
All
All buttons excluding
5. Select “Finish” with or .
6. Press to exit.
The Optional Settings menu is closed.